Cumulus Support

After the USB failing to read from the unit (N96GY) I reset the weather station as usual by pulling all power then restarted and set the unit up again, no different to the numerous times I have done this before.

However on this occasion I go to view > select a graph and nothing shows other than the x,y axis with 0 and 00:00 for the past 24 hours. I decided to go back one day at a time, and find that the graph shows up to the 24/04/13 then nothing after this.
If I go to any other view like 'this period' or 'graphs', then the data is shown.

Cumulus 1.9.3 Build 1059

If at the point you had to reset the station Cumulus needed the logger data to 'catch up' from when it was last running, the reset probably meant that the data wasn't available to be downloaded. Is it actually there in the April log file?

If you zip the diags folder and attach it, with your April log file, I'll take a look.

Attached the diags folder, zipped up as requested Plus April log file

There's a corruption in the log file:

27/04/2013 01:50:16.304 : Error reading C:\Cumulus\data\Apr13log.txt at line 3733: List index out of bounds (1)
27/04/2013 01:50:16.304 : Please edit the file to correct the error

It would normally flash the error light to bring this to your attention.
You need to delete all of those NULs on line 3733.

Many thanks, now works perfectly.

Despite skimming through the file, I completely missed that.