Page 1 of 1
Wind Spike with WS-2350
Posted: Sun 17 Mar 2013 7:50 am
by geoffp
Any ideas how I can cure these wind spikes, over 80mph this one,
wind.png
Any advice on how to edit the "Today" file in Data to get rid of this figure
Many thanks.
Re: Wind Spike with WS-2350
Posted: Sun 17 Mar 2013 11:13 am
by steve
geoffp wrote:Any ideas how I can cure these wind spikes, over 80mph this one,
I don't know how you can cure them, but you can use the spike removal settings on the Cumulus calibration screen to get Cumulus to ignore them.
Any advice on how to edit the "Today" file in Data to get rid of this figure
Stop Cumulus and open today.ini in a text editor. Edit the Gust= figure and the Time= figure. Replace them with something approximated from the graph or from your March log file.
Re: Wind Spike with WS-2350
Posted: Sun 17 Mar 2013 11:19 am
by geoffp
Many thanks Steve, is there anything anywhere regarding settings for spikes in the calibration page, I see it is in m/s.
Thanks
Re: Wind Spike with WS-2350
Posted: Sun 17 Mar 2013 11:25 am
by steve
Apart from the help? What do you want to know that isn't covered there?
Re: Wind Spike with WS-2350
Posted: Sun 17 Mar 2013 11:35 am
by geoffp
It's ok Steve, I must have missed it in the help section