Steelseries 2.2.1

[Stuart2007]

Hi Mark

I'm trying to integrate my compass etc into the latest build 2.2.1 but have an error coming up in RGraph.rose.min.js, no doubt rippled through from my version of gauges.js (gauges221-MH.js).

Test page is at http://www.oldlandwindmill.co.uk/newsit ... 221-MH.htm

Any suggestions for a 'learner'!?

Many thanks

Stuart

[mcrossley]

OK a couple of problems to sort out first I think.

You have an old copy of steelseries, you have version 0.11.15, you need to upgrade to 0.13.0 (that will fix the LCD panel sizing issues)

You have an old copy of RGraph.common.core.min.js, upgrade to the version in SS gauges zip file 2.2.x

[Stuart2007]

Thanks Mark, that has almost cleared things, a few bits still to go, but would never have done this without your help, so much

Stuart

[mcrossley]

The SteelSeries is still version 0.11.15

EDIT: You need the latest 0.13.0 from github

[Stuart2007]

Hi MArk

You have an old copy of steelseries, you have version 0.11.15, you need to upgrade to 0.13.0 (that will fix the LCD panel sizing issues)

Right, found 0.13.0 steelseries (FULL version with compass - trying to use the 'weather' version from the download had me fooled for a good while) which fixes the issues generally, but I still have a blank windrose on an ipad - whereas your own site shows the gauge fine, so I am still missing something.

Incidentally, the on-line store at https://dl.dropbox.com/u/84552/SteelSer ... lseries.js is only at 0.11.14....

Any suggestions where I should look to get the windrose onto the ipad..?

Stuart

[mcrossley]

Hi Stuart

I do not have an iPad to test on, but have you tried clearing the browser cache on the iPad?

That Dropbox link is nothing to do with me, there are lots of sites that take copies of downloadable software and make it 'available', but they often fail to stay up to date. You are always best going to the original source if you can.

[Stuart2007]

Hi Mark

Think I'll have to build in some diagnostics to test ipad, flushed the cache without success...and now I note it does not auto-refresh so there is more going on...or rather, NOT doing so.

This will be a project for Friday at the earliest...

Apart from troubling you direct, for future reference do you have a site with 'the latest versions' on? I assumed the link from google+ implied that dropbox download site was fairly pukka.

Stuart

[mcrossley]

Hi Stuart

The link is above. Though I did edit my message after I posted it ..

The SteelSeries is still version 0.11.15

EDIT: You need the latest 0.13.0 from github

I have never posted anything on Drop Box to my knowledge, all my G+ posts for SteelSeries are here