Page 1 of 1

'Missing' data lines on Outside Temperature Graph

Posted: Sun 17 Feb 2013 1:01 pm
by Dennisdg
My Graph for Outside Temp. is missing graph lines for Heat Index and Wind Chill, the data is shown on the other standard web pages.
If I look the Graphs option in Cumulus where you can change the colour of the graph lines, when changed both Heat Index and Wind Chill colours seem to follow the graph value for Temperature which doesn't look correct.
Both Heat Index & Wind Chill are selected!

Any idea what/where I should check please.

Thanks

Dennis

Station Davis Vantage VUE

WEB Site http://www.denniswx.webspace.virginmedia.com/index.htm

Re: 'Missing' data lines on Outside Temperature Graph

Posted: Sun 17 Feb 2013 1:09 pm
by steve
2013-02-17 13_20_55-Camberley weather.png
Your Heat Index and Wind Chill values are the same as your temperature, so the chart lines coincide. See http://wiki.sandaysoft.com/a/FAQ#My_hea ... emperature

Re: 'Missing' data lines on Outside Temperature Graph

Posted: Sun 17 Feb 2013 3:26 pm
by Dennisdg
Thank you Steve

I couldn't see it for looking! I shall wait for the wind speed to increase when its below 10 deg C.
Please confirm the wind has to be > 4.8 kph and not kts.

Dennis

Re: 'Missing' data lines on Outside Temperature Graph

Posted: Sun 17 Feb 2013 3:36 pm
by steve
Yes, above about 4.8 kilometres per hour.

Re: 'Missing' data lines on Outside Temperature Graph

Posted: Sun 17 Feb 2013 3:41 pm
by Dennisdg
Thanks