Page 1 of 1

Reset Last 24hr figure

Posted: Thu 13 Dec 2012 3:12 pm
by NoelGlass
Hi Steve

I Have another Problem now, I have looked and looked in the faq and i remember having this problem before but i have the wrong figure in my Last 24hr rain fall box and wont to reset back to 0 an cant remember where you adjust.

thanks Again

Re: Reset Last 24hr figure

Posted: Thu 13 Dec 2012 3:35 pm
by steve
The easiest solution is just to leave it and let it fix itself. If you don't want to do that, you need to stop Cumulus and edit the 'total rain counter' field in Dec12log.txt. Look at the latest value that your new station is supplying, and edit the old ones back to 24 hours ago to have the same value. Make sure you edit the correct field, it's the 12th entry in each line, the one just after the pressure (which is easy to spot if you use mb/hPa).

Re: Reset Last 24hr figure

Posted: Sat 15 Dec 2012 7:11 am
by NoelGlass
Hi Steve

It settled down lovely and had rain yesterday and all the figures running like a dream, apart from one !!

If I go to view Highs and Lows and look at monthly under December rainfall its put ytd off 565mm and climbing is there anywhere i can amend this figure.

Thanks again for all your help.

Re: Reset Last 24hr figure

Posted: Sat 15 Dec 2012 8:00 am
by William Grimsley
Hi there,

In Cumulus, go to..."Edit"..."Monthly records"..click "Dec" at the top then click "Fetch dayfile data" at the bottom. Then go down to the record that is incorrect...click on the right and click "Copy".

Hope this helps...

Will

Re: Reset Last 24hr figure

Posted: Sat 15 Dec 2012 11:08 am
by steve
NoelGlass wrote:If I go to view Highs and Lows and look at monthly under December rainfall its put ytd off 565mm and climbing is there anywhere i can amend this figure.
The monthly and annual totals are calculated from the daily totals in dayfile.txt, so if I understand you correctly,you need to correct one or more of this month's daily totals to correct your December figure (and then restart Cumulus). You'll need to do that before carrying out the procedure suggested in the previous post, as otherwise it will simply fetch the existing record.

Re: Reset Last 24hr figure

Posted: Sat 15 Dec 2012 8:34 pm
by NoelGlass
Hi

I think we are at cross purposes here, I will try and make it more clear.

First my Dayfile.txt is fine and correct.

If i go View, High and Lows, monthly then click Dec and then the rainfall tab ( screen like New records )

How can I alter this figure.

Thanks Again
Untitled.png

Re: Reset Last 24hr figure

Posted: Sat 15 Dec 2012 9:04 pm
by William Grimsley
Do what I said in my other post.

Re: Reset Last 24hr figure

Posted: Sat 15 Dec 2012 10:14 pm
by steve
NoelGlass wrote:First my Dayfile.txt is fine and correct.
Sorry - you said the figure was climbing so I assumed that your current month's total was incorrect and similarly climbing. If that's not the case, then you just need to do as William suggests.

Re: Reset Last 24hr figure

Posted: Sun 16 Dec 2012 7:20 am
by NoelGlass
Thanks Guys

Sorted