Welcome to the Cumulus Support forum.

Latest Cumulus MX V4 release 4.4.2 (build 4085) - 12 March 2025

Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024

Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)

Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki

If you are posting a new Topic about an error or if you need help PLEASE read this first viewtopic.php?p=164080#p164080

Can you use two F/O Consoles on one system ---

Discussion specific to Fine Offset and similar rebadged weather stations
Post Reply
User avatar
robynfali
Posts: 1076
Joined: Sat 31 Jul 2010 10:34 pm
Weather Station: Vantage Vue
Operating System: Windows XP
Location: Anglesey, North Wales, UK
Contact:

Can you use two F/O Consoles on one system ---

Post by robynfali »

The definitive answer....NO

I tried several times, and in several different ways today, different switch on and synch procedures and nothing, the second console (old one) will not receive the signal from the new transmitter.

So there's your answer folks, I dont know if it means the same with any other system, but the maplin one it won't


SIMPLES

Image
AllyCat
Posts: 1132
Joined: Sat 26 Feb 2011 1:58 pm
Weather Station: Fine Offset 1080/1 & 3080
Operating System: Windows XP SP3
Location: SE London

Re: Can you use two F/O Consoles on one system ---

Post by AllyCat »

Hi,

Well IMHO strictly the answer to the title is "Yes", but with an exception of "Not in the case of two Maplin systems, where one was manufactured some time (years) ago and the other more recently". Discussed several times before on this forum, but most recently here.

The FO protocol is very much "transmit and hope", so the transmitter has no idea (nor cares) whether one or ten Consoles are "listening". Several users have reported on this forum using two FO Consoles with the same transmitter, perhaps one "hanging on the wall" and the other just feeding data via USB to a PC.

Cheers, Alan.
User avatar
robynfali
Posts: 1076
Joined: Sat 31 Jul 2010 10:34 pm
Weather Station: Vantage Vue
Operating System: Windows XP
Location: Anglesey, North Wales, UK
Contact:

Re: Can you use two F/O Consoles on one system ---

Post by robynfali »

posting here also



I take it back!!!!!


If you have TWO maplin consoles that have been manufactured around the same time they might work


The station i bought last week, well the anemometer froze, so i had to take it back, but accidently packed the wrong display unit, leaving the new one at home and giving the old one back, so now i have two new display units, and during set up tonight, i tried it, inserting the batteries in the transmitter, then 1st display, then 2nd, all within 30 seconds.

Guess what.............identical indoor and outdoor info on both!
Tony500
Posts: 4
Joined: Thu 03 Dec 2009 12:05 pm
Weather Station: Maplin N96GY
Operating System: Windows XP SP3
Location: Mid Devon UK

Re: Can you use two F/O Consoles on one system ---

Post by Tony500 »

I've been using three consoles in different rooms for the last couple of years. I bought the second and third systems mainly for spare sensors, thinking the plastic didnt look as if it would last too long (haven't needed them yet though after running the original set for three years). My oldest one is plugged into the PC as the logger, the others are just for display. Interesting to see the differences in pressure between them. They only drift from each other by .1 or .2 hpa per month, which doesn't seem too bad.
Post Reply