I'm suffering through a pattern of just about every other day I lose my outside temp sensor and the data goes flatline. All other sensors and data are fine. Restart Cumulus - all ok.
I put new lithium batts in the transmitter. Heck, I even have the WWV signal lock on almost all the time too. I ran months at a time with no loss all through the winter (upstate NY!).
Over a year old - WS 1080 (USA freq).
Any ideas?
Thanks
Scott
Welcome to the Cumulus Support forum.
Latest Cumulus MX V4 release 4.4.2 (build 4085) - 12 March 2025
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
If you are posting a new Topic about an error or if you need help PLEASE read this first viewtopic.php?p=164080#p164080
Latest Cumulus MX V4 release 4.4.2 (build 4085) - 12 March 2025
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
If you are posting a new Topic about an error or if you need help PLEASE read this first viewtopic.php?p=164080#p164080
More Lost outside Temp Sensor
-
steve
- Cumulus Author
- Posts: 26672
- Joined: Mon 02 Jun 2008 6:49 pm
- Weather Station: None
- Operating System: None
- Location: Vienne, France
- Contact:
Re: More Lost outside Temp Sensor
Are you getting the 'sensor contact lost' message from Cumulus, with the flashing red error light? It sounds like you're not, as that wouldn't just affect temperature. Are you using a 'spike removal' setting for temperature? If you zip up the diags folder and attach it, I'll take a look.
There have been later builds of 1.9.2 released since 1017; it would be a good idea to install the latest, as it has a number of bug fixes.
There have been later builds of 1.9.2 released since 1017; it would be a good idea to install the latest, as it has a number of bug fixes.
Steve
-
ScottVan
- Posts: 73
- Joined: Fri 03 Jun 2011 2:58 am
- Weather Station: F/O
- Operating System: Win 10
- Location: Ballston Lake New York
Re: More Lost outside Temp Sensor
Steve,
It did it again. I wonder...I have all of my data in one folder for over a year. Should I archive it or move it out of where it is? The folder is 180 mb right now.
Diags attached if that will help.
Scott
It did it again. I wonder...I have all of my data in one folder for over a year. Should I archive it or move it out of where it is? The folder is 180 mb right now.
Diags attached if that will help.
Scott
You do not have the required permissions to view the files attached to this post.
-
steve
- Cumulus Author
- Posts: 26672
- Joined: Mon 02 Jun 2008 6:49 pm
- Weather Station: None
- Operating System: None
- Location: Vienne, France
- Contact:
Re: More Lost outside Temp Sensor
You missed my question about spike removal. You've set it, and you've set it to only one degree, so it's quite likely to trigger. A change of one degree is not a spike!
7/27/2012 19:34:50.421 : Temp difference greater than specified; reading ignored
7/27/2012 19:34:50.421 : Old value = 25.8 New value = 24.7 EWtempdiff = 1.0
7/27/2012 19:34:50.421 : Temp difference greater than specified; reading ignored
7/27/2012 19:34:50.421 : Old value = 25.8 New value = 24.7 EWtempdiff = 1.0
Steve
-
ScottVan
- Posts: 73
- Joined: Fri 03 Jun 2011 2:58 am
- Weather Station: F/O
- Operating System: Win 10
- Location: Ballston Lake New York
Re: More Lost outside Temp Sensor
Uggg, what a blockhead! I set it back to 3 to see how that works. Sorry to miss that obvious issue and thanks for catching it.
steve wrote:You missed my question about spike removal. You've set it, and you've set it to only one degree, so it's quite likely to trigger. A change of one degree is not a spike!
7/27/2012 19:34:50.421 : Temp difference greater than specified; reading ignored
7/27/2012 19:34:50.421 : Old value = 25.8 New value = 24.7 EWtempdiff = 1.0