Page 2 of 2
Re: Rain Gauge
Posted: Wed 18 Jul 2012 9:40 am
by steve
Are you forgetting to click 'add the file' after you've browsed for it?
Sandaysoft • Post a reply_2012-07-18_10-41-45.png
Re: Rain Gauge
Posted: Thu 19 Jul 2012 5:57 pm
by BJones
working Windows on a Mac can be a problem at times, and this seems one of them. I'll try again to attach.
Re: Rain Gauge
Posted: Thu 19 Jul 2012 6:16 pm
by steve
Got the file OK, but the last entry is for the 15th March, so they're presumably the wrong files.
Re: Rain Gauge
Posted: Fri 20 Jul 2012 2:13 pm
by BJones
That is the only diags. file I have.
Re: Rain Gauge
Posted: Fri 20 Jul 2012 2:38 pm
by steve
Then it's either an old diags.zip file that you created back in March, or, if you have just created the file, then you've zipped up the wrong diags folder - e.g. one from a previous older installation of Cumulus. Or you have some strange problem on your system where Cumulus has been unable to create any files since March. That would certainly cause odd rainfall data.
Re: Rain Gauge
Posted: Sat 21 Jul 2012 7:09 pm
by BJones
Hi again. I've checked the diags file again and I can see a file007 in there created today. I'll attach again and see what will happen. I'm not sure what has happened to the readings. All I can say is that up to approx. a week ago everything worked fine with no problems at all.
Re: Rain Gauge
Posted: Sat 21 Jul 2012 7:35 pm
by steve
That file confirms that yesterday at 15:10 was the first time you had run that installation of Cumulus since 15th March:
20/07/2012 15:10:15.187 : Read today file: Date = 15/03/2012, LastUpdateTime = 15/03/2012 15:00:00
But anyway, the new diags file does show that you have some kind of problem with the station, or with its connection to the PC:
21/07/2012 19:23:15.250 : EWUSB: HidControl Device Removal
21/07/2012 19:23:15.250 : VID = 1941 PID = 8021
21/07/2012 19:23:15.250 : Error - station removed - check connections
21/07/2012 19:23:15.250 : 19:23:15 EWUSB: HidControl Arrival
21/07/2012 19:23:15.250 : VID = 1941 PID = 8021
21/07/2012 19:23:15.250 : 19:23:15 EWUSB: HidControl Arrival
21/07/2012 19:23:15.250 : VID = 203A PID = FFFB
21/07/2012 19:23:15.250 : 19:23:15 EWUSB: HidControl Arrival
21/07/2012 19:23:15.250 : VID = 203A PID = FFFC
21/07/2012 19:23:16.750 : EWUSB: HidControl Device Removal
21/07/2012 19:23:16.750 : VID = 1941 PID = 8021
21/07/2012 19:23:16.750 : Error - station removed - check connections
21/07/2012 19:23:16.765 : EWUSB: HidControl Device Removal
21/07/2012 19:23:16.765 : VID = 1941 PID = 8021
21/07/2012 19:23:16.765 : Error - station removed - check connections
21/07/2012 19:23:16.781 : EWUSB: HidControl Device Removal
21/07/2012 19:23:16.781 : VID = 1941 PID = 8021
21/07/2012 19:23:16.781 : Error - station removed - check connections
21/07/2012 19:23:16.812 : EWUSB: HidControl Device Removal
21/07/2012 19:32:00.656 : *** Data input appears to have stopped
21/07/2012 19:33:00.656 : *** Data input appears to have stopped
21/07/2012 19:33:05.250 : EWUSB: HidControl Device Removal
21/07/2012 19:33:05.250 : VID = 1941 PID = 8021
21/07/2012 19:33:05.250 : Error - station removed - check connections
21/07/2012 19:34:00.656 : *** Data input appears to have stopped
21/07/2012 19:35:00.656 : *** Data input appears to have stopped
21/07/2012 19:36:00.656 : *** Data input appears to have stopped
21/07/2012 19:36:48.078 : EWUSB: HidControl Device Removal
21/07/2012 19:36:48.078 : VID = 1941 PID = 8021
21/07/2012 19:36:48.078 : Error - station removed - check connections
21/07/2012 19:36:48.296 : EWUSB: HidControl Device Removal
21/07/2012 19:36:48.296 : VID = 1941 PID = 8021
21/07/2012 19:36:48.296 : Error - station removed - check connections
21/07/2012 19:36:48.312 : EWUSB: HidControl Device Removal