Cumulus Support

I checked february weather in "This month" and find out there has been snow lying for 29 days !!
It has been snow lying all days in february but its only 28 this year.

I find out that the "Air frost" value is not reset to zero if its no days with Air Frost.

If I look at february its 28 days with "Air frost" and look to march it should be zero to day (1/3)
the same if I look att sept 2008 but if I look at january it change to 25 days and stay at 25 if I look to a month with zero

Summary for februari 2009

Temperature (°C):
Mean (1 minute) -3,2
Mean (min+max) -3,2
Mean Minimum -6,5
Mean Maximum 0,0
Minimum -13,9 day 21
Maximum 4,3 day 26
Highest Minimum 0,6 day 25
Lowest Maximum -5,9 day 13
Air frosts 28

Rainfall (mm):
Total for month 6,9
Wettest day 5,1 day 24
Rain days 5

Wind (m/s):
Highest Gust 13,3 day 08
Average Speed 0,6
Wind Run 1453,3 km
Gale days 0

Pressure (mb):
Maximum 1033,1 day 01
Minimum 982,7 day 08

Days with snow falling 5
Days with snow lying at 0900 29

Samuel wrote:I checked february weather in "This month" and find out there has been snow lying for 29 days !!
It has been snow lying all days in february but its only 28 this year.

You probably have 29 entries in dayfile.txt for February. It looks up the snow data from the weather diary for every day that's in dayfile.txt, but it doesn't check for duplicates.

I find out that the "Air frost" value is not reset to zero if its no days with Air Frost.

If I look at february its 28 days with "Air frost" and look to march it should be zero to day (1/3)
the same if I look att sept 2008 but if I look at january it change to 25 days and stay at 25 if I look to a month with zero

This only happens if the month you switch to has no data (e.g. March 2009 has no data yet). It doesn't clear the air frost field as it does with all the others if it doesn't find any data. It's easy enough to fix to keep it tidy, so I'll fix it.

Steve

Thanks for your help !

I have two 13/2, I delated one, and now its okey !

I've fixed the air frost thing in the latest build that I've just uploaded.

Steve