Alarm

E1001met · Post by **E1001met** » Mon 21 May 2012 10:20 pm

Hello, good evening to everybody. I am a new user (spanish) and I have an Easy Weather program running with Cumulus, very well. Lately I cannot stop alarm on wind or gust. Is very annoying to touch the screen continously to stop the alarm sound. I have no one alarm activated. So I need some info about this problem. Thanks a lot.

Post by **steve** » Tue 22 May 2012 6:03 am

E1001met wrote:I have an Easy Weather program running with Cumulus

You can't run Easyweather at the same time as Cumulus, unless you use the 'easyweather.dat' setting, and that's not a good idea. If that's the setting you are using, you should switch to the 'Fine Offset' setting and don't run Easyweather at the same time. You'll get much better results from Cumulus that way.

Lately I cannot stop alarm on wind or gust. Is very annoying to touch the screen continously to stop the alarm sound. I have no one alarm activated. So I need some info about this problem. Thanks a lot.

It sounds like your console is faulty; I seem to remember someone else having this problem. Have you tried resetting the console - remove USB cable and batteries?

E1001met · Post by **E1001met** » Tue 22 May 2012 6:55 am

Thank you very much. At last I reset the console and everything running right.

Tks agn.

Cumulus Support

Alarm

Alarm

Re: Alarm

Re: Alarm