In Control Panel, some days ago, I disabled stand-by of USB Hub Ports, but today at 5.28 I find the error logged on Cumulus and flat graphs on web-site
I closed Cumulus program and restarded but the program remains halted on "Downloading data".
The datalogger memory was full, so I tried do erase data logger memory by console, strange thing: pressing two times "memory zone" on touch screen doesn't show "CLEAR" word, the console seems not responding, but the other touch zones of the console are right.
The only way to erase memory was to remove batteries.
Then I§ restarted Cumulus and the program run OK.
Could be the problem "data stop........" related to data logger memory full?
Thank You.
Welcome to the Cumulus Support forum.
Latest Cumulus MX V4 release 4.4.2 (build 4085) - 12 March 2025
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
If you are posting a new Topic about an error or if you need help PLEASE read this first viewtopic.php?p=164080#p164080
Latest Cumulus MX V4 release 4.4.2 (build 4085) - 12 March 2025
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
If you are posting a new Topic about an error or if you need help PLEASE read this first viewtopic.php?p=164080#p164080
Data input appears to be stopped. Check.....and restart...
-
CrasHBoneS
- Posts: 96
- Joined: Fri 06 Jan 2012 10:49 am
- Weather Station: PCE-FWS20
- Operating System: Windows XP SP3
- Location: Bellaria Igea Marina (RN)
- Contact:
-
steve
- Cumulus Author
- Posts: 26672
- Joined: Mon 02 Jun 2008 6:49 pm
- Weather Station: None
- Operating System: None
- Location: Vienne, France
- Contact:
Re: Data input appears to be stopped. Check.....and restart.
It's hard to say, but it's unlikely. When it gets to the end of the memory it just starts again at the beginning, it shouldn't cause the console to stop responding.CrasHBoneS wrote:Could be the problem "data stop........" related to data logger memory full?
Steve