Cumulus Support

I hope I have followed instructions on wiki and configuration, however maybe i have misunderstood ..here are screen-shots of what I see:

FTP screen
Status: Connecting to 50.63.211.1:21...
Status: Connection established, waiting for welcome message...
Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------
Response: 220-You are user number 7 of 500 allowed.
Response: 220-Local time is now 05:46. Server port: 21.
Response: 220-This is a private system - No anonymous login
Response: 220 You will be disconnected after 3 minutes of inactivity.
Command: USER myli1936
Response: 331 User myli1936 OK. Password required
Command: PASS **********
Response: 230-User myli1936 has group access to: inetuser
Response: 230 OK. Current restricted directory is /
Command: SYST
Response: 215 UNIX Type: L8
Command: FEAT
Response: 211-Extensions supported:
Response: EPRT
Response: IDLE
Response: MDTM
Response: SIZE
Response: REST STREAM
Response: MLST type*;size*;sizd*;modify*;UNIX.mode*;UNIX.uid*;UNIX.gid*;unique*;
Response: MLSD
Response: TVFS
Response: ESTP
Response: PASV
Response: EPSV
Response: SPSV
Response: ESTA
Response: AUTH TLS
Response: PBSZ
Response: PROT
Response: 211 End.
Status: Connected
Status: Retrieving directory listing...
Command: PWD
Response: 257 "/" is your current location
Command: TYPE I
Response: 200 TYPE is now 8-bit binary
Command: PASV
Response: 227 Entering Passive Mode (50,63,211,1,196,61)
Command: MLSD
Response: 150 Accepted data connection
Response: 226-ASCII
Response: 226-Options: -a -l
Response: 226 75 matches total
Status: Directory listing successful
Status: Retrieving directory listing...
Command: CWD /mycaddisfly
Response: 250 OK. Current directory is /mycaddisfly
Command: PWD
Response: 257 "/mycaddisfly" is your current location
Command: PASV
Response: 227 Entering Passive Mode (50,63,211,1,197,94)
Command: MLSD
Response: 150 Accepted data connection
Response: 226-ASCII
Response: 226-Options: -a -l
Response: 226 32 matches total
Status: Directory listing successful
Status: Retrieving directory listing...
Command: CWD /mycaddisfly/myweather
Response: 250 OK. Current directory is /mycaddisfly/myweather
Command: PWD
Response: 257 "/mycaddisfly/myweather" is your current location
Command: PASV
Response: 227 Entering Passive Mode (50,63,211,1,197,164)
Command: MLSD
Response: 150 Accepted data connection
Response: 226-ASCII
Response: 226-Options: -a -l
Response: 226 13 matches total
Status: Directory listing successful

Cum Config:I don't seem to be able to paste the config scrn ..here is what the opening lines are: host= mylighttabele.com, dir = mycaddisfly/myweather, form url= http://sandysoft.com/forum/

any suggestions .. I want to paste the weather from my location on my website
Thanks

If you turn on ftp logging in Cumulus, it will produce a file called ftplog.txt which may show what's going on.

the FTP logging file indicates FTP Connect Error - Error code 10060 what is / where do I find the explanation for the code?

FTP error 10060 is a general 'no response from server' error. Host mylighttabele.com gives a 'not found' for me.

mylighttable is the main account into godaddy, mycaddisfly is a sub domain. look at mycaddisfly.org. mylighttable.com is the parent [?]

When you typed mylighttabele.com above, was that a typo here, or was that what you put into Cumulus? Either way, the Cumulus ftp log should show what's going on.

Here is a copy of a portion of the ftptxt file ...it appears to be repeating:

21:45:49:340 ! HighLevelAsync 0
21:45:49:352 TWSocket will connect to 63.249.251.249:21
21:46:10:358 04B12180 TCustomWSocket.Shutdown 1 1020
21:46:10:359 FTP Connect Error, Error code = 10060
21:46:10:359 ! HighLevelAsync 0
21:46:10:360 TWSocket will connect to 63.249.251.249:21
21:46:31:372 04B12180 TCustomWSocket.Shutdown 1 1020
21:46:31:373 FTP Connect Timeout
22:00:08:057 ! HighLevelAsync 0
22:00:08:060 TWSocket will connect to 63.249.251.249:21
22:00:29:102 04B12180 TCustomWSocket.Shutdown 1 1092
22:00:29:109 FTP Connect Error, Error code = 10060
22:00:29:109 ! HighLevelAsync 0
22:00:29:110 TWSocket will connect to 63.249.251.249:21
22:00:50:112 04B12180 TCustomWSocket.Shutdown 1 1096
22:00:50:113 FTP Connect Error, Error code = 10060
22:00:50:113 ! HighLevelAsync 0
22:00:50:113 TWSocket will connect to 63.249.251.249:21
22:01:11:184 04B12180 TCustomWSocket.Shutdown 1 1096
22:01:11:185 FTP Connect Error, Error code = 10060
22:01:11:186 ! HighLevelAsync 0
22:01:11:190 TWSocket will connect to 63.249.251.249:21
22:01:32:265 04B12180 TCustomWSocket.Shutdown 1 920
22:01:32:266 FTP Connect Timeout

I have not a clue to what this says. If 63.249.251.249 is an IP address ,I got now response. 50.63.221.1 is the ip for the host server.
I appears the problem is at my computer / cumulus set up / internet config ..yes?

mycaddisfly wrote:I have not a clue to what this says. If 63.249.251.249 is an IP address ,I got now response. 50.63.221.1 is the ip for the host server.
I appears the problem is at my computer / cumulus set up / internet config ..yes?

Yes, your DNS is resolving the host name to 63.249.251.249, and whatever that machine is, it doesn't currently accept FTP connections. If you can't fix this, you could put the IP address in for the host name as a last resort, but of course it's not really recommended to use IP addresses instead of names as IP addresses can change.

OK thanks, I will contact godaddy and talk with them about the connection and what I am trying to do as I have also a photblog that may require the same type of ftp uploading. I will let you know the resolve.

this is a search I did ...

63.249.251.249 is from United States

An Internet Protocol address (IP address 63.249.251.249) is a numerical label that is allocated to a computer (can be any electronic device) which is part of a network (CIHS) that utilises the Internet Protocol. Every IP address does the following: (1) location addressing and (2) host or network interface identification.



e.g. 209.62.45.34 IPv4/IPv6 format for an IP Address, or maxmind.com for a website

Compare to another IP
IP Address: 63.249.251.249
IP Address Country: United States (US)
IP Address Region: TX Texas
IP Address City: Bedford
IP Postal Code 76021
IP Address Area Code 817
IP Metro Code 623
IP Address Latitude: 32.8522987366
IP Address Longitude: -97.1342010498
IP Address ISP: CIHS
Organisation: CIHS
IP Address Proxy:
IP Address Host: 63.249.251.249

63.249.251.249 is in Bedford Texas United States
Map data ©2012 Google, INEGI - Terms of Use
50 mi100 km

We have 1 complaints about 63.249.251.249
Is 63.249.251.249 misbehaving (engaging in SPAM, brute-force, DOS attack, phishing, or other fraud? Report the abuser now!
Do you think that because I use your form there might be a connection? I use my FTP all the time and do not get redirected? suggestions?

I don't understand what you're asking. The ftp component that Cumulus uses translates the host name you supply into an IP address using Windows DNS. Your system is apparently returning the wrong IP address.

I notice that mycaddisfly.org resolves to the same address as mylighttable.com, so you could try using that for the host name instead, that would the logical name to use anyway. Or you could just use the IP address.

mylighttable.com resolves to 50.63.211.1 which is what you had in the log file you posted above. Where has 63.249.251.249 come from? Have you changed the host name in the Cumulus configuration?

In my FTP I enter 50.63.221.1 as the IP ... in cumulus' form I enter the same IP however the error says it cant open the host... which is all reported earlier in this posting. I do not understand ... probably give up as nothing should be this hard. Is there another way I can up load to the host ..how about another FTP program other than filezilla ..which works for everything else ..

Now that you're using an IP address instead, could you please turn on ftp logging, let it run for a while, and then attach the ftplog.txt file. Please also attach a screen shot of your Cumulus internet settings; if you're not sure how to take screen shots in Windows, there are some tips in the wiki: http://wiki.sandaysoft.com/a/Screen_capture

I don't understand the reference to Filezilla, are you having problems with that too?

Will some walk me through what this FTPlog data is telling me? I fiannly have a connection, however nothing on the web site:

14:46:26:713 ! HighLevelAsync 0
14:46:26:713 FTP Command: STOR today.htmtmp
14:46:26:714 040F2180 TriggerDataSent 1304
14:46:47:805 FTP Response: 425 Could not open data connection to port 53411: Connection timed out
14:46:47:805 >|425 Could not open data connection to port 53411: Connection timed out|

14:46:47:805 040F2890 TCustomWSocket.Shutdown 1 1876
14:46:48:631 Renaming today.htmtmp to today.htm
14:46:48:631 ! HighLevelAsync 0
14:46:48:631 FTP Command: RNFR today.htmtmp
14:46:48:631 040F2180 TriggerDataSent 1304
14:46:48:720 FTP Response: 350 RNFR accepted - file exists, ready for destination
14:46:48:720 >|350 RNFR accepted - file exists, ready for destination|

14:46:48:720 ! HighLevelAsync 0
14:46:48:720 FTP Command: RNTO today.htm
14:46:48:720 040F2180 TriggerDataSent 1304
14:46:48:808 FTP Response: 250 File successfully renamed or moved
14:46:48:808 >|250 File successfully renamed or moved|

14:46:48:808 ! HighLevelAsync 0
14:46:48:808 ! HighLevelAsync done
14:46:49:631 Uploading C:\Cumulus\web\yesterday.htm to yesterday.htmtmp
14:46:49:631 ! HighLevelAsync 0
14:46:49:632 FTP Command: PORT 192,168,0,196,208,169
14:46:49:634 040F2180 TriggerDataSent 1304
14:46:49:723 FTP Response: 200 PORT command successful
14:46:49:723 >|200 PORT command successful|

14:46:49:723 ! HighLevelAsync 0
14:46:49:723 FTP Command: STOR yesterday.htmtmp
14:46:49:723 040F2180 TriggerDataSent 1304
14:47:10:815 FTP Response: 425 Could not open data connection to port 53417: Connection timed out
14:47:10:815 >|425 Could not open data connection to port 53417: Connection timed out|

14:47:10:815 040F2890 TCustomWSocket.Shutdown 1 1316
14:47:11:722 Renaming yesterday.htmtmp to yesterday.htm
14:47:11:722 ! HighLevelAsync 0
14:47:11:722 FTP Command: RNFR yesterday.htmtmp
14:47:11:722 040F2180 TriggerDataSent 1304
14:47:11:812 FTP Response: 350 RNFR accepted - file exists, ready for destination
14:47:11:812 >|350 RNFR accepted - file exists, ready for destination|

14:47:11:812 ! HighLevelAsync 0
14:47:11:812 FTP Command: RNTO yesterday.htm
14:47:11:812 040F2180 TriggerDataSent 1304
14:47:11:900 FTP Response: 250 File successfully renamed or moved
14:47:11:900 >|250 File successfully renamed or moved|

14:47:11:900 ! HighLevelAsync 0
14:47:11:900 ! HighLevelAsync done
14:47:12:722 Uploading C:\Cumulus\web\record.htm to record.htmtmp
14:47:12:722 ! HighLevelAsync 0
14:47:12:723 FTP Command: PORT 192,168,0,196,208,177
14:47:12:723 040F2180 TriggerDataSent 1304
14:47:12:812 FTP Response: 200 PORT command successful
14:47:12:812 >|200 PORT command successful|

14:47:12:812 ! HighLevelAsync 0
14:47:12:812 FTP Command: STOR record.htmtmp
14:47:12:813 040F2180 TriggerDataSent 1304
14:47:33:907 FTP Response: 425 Could not open data connection to port 53425: Connection timed out
14:47:33:907 >|425 Could not open data connection to port 53425: Connection timed out|

14:47:33:907 040F2890 TCustomWSocket.Shutdown 1 1320
14:47:34:738 Renaming record.htmtmp to record.htm
14:47:34:738 ! HighLevelAsync 0
14:47:34:738 FTP Command: RNFR record.htmtmp
14:47:34:738 040F2180 TriggerDataSent 1304
14:47:34:826 FTP Response: 350 RNFR accepted - file exists, ready for destination
14:47:34:826 >|350 RNFR accepted - file exists, ready for destination|

14:47:34:826 ! HighLevelAsync 0
14:47:34:826 FTP Command: RNTO record.htm
14:47:34:827 040F2180 TriggerDataSent 1304
14:47:34:921 FTP Response: 250 File successfully renamed or moved
14:47:34:921 >|250 File successfully renamed or moved|

14:47:34:921 ! HighLevelAsync 0
14:47:34:921 ! HighLevelAsync done
14:47:35:738 Uploading C:\Cumulus\web\trends.htm to trends.htmtmp
14:47:35:738 ! HighLevelAsync 0
14:47:35:739 FTP Command: PORT 192,168,0,196,208,188
14:47:35:740 040F2180 TriggerDataSent 1304
14:47:35:827 FTP Response: 200 PORT command successful
14:47:35:827 >|200 PORT command successful|

14:47:35:827 ! HighLevelAsync 0
14:47:35:827 FTP Command: STOR trends.htmtmp
14:47:35:828 040F2180 TriggerDataSent 1304
14:47:56:922 FTP Response: 425 Could not open data connection to port 53436: Connection timed out
14:47:56:922 >|425 Could not open data connection to port 53436: Connection timed out|

14:47:56:922 040F2890 TCustomWSocket.Shutdown 1 1308
14:47:57:739 Renaming trends.htmtmp to trends.htm
14:47:57:739 ! HighLevelAsync 0
14:47:57:739 FTP Command: RNFR trends.htmtmp
14:47:57:739 040F2180 TriggerDataSent 1304
14:47:57:867 FTP Response: 350 RNFR accepted - file exists, ready for destination
14:47:57:867 >|350 RNFR accepted - file exists, ready for destination|

14:47:57:867 ! HighLevelAsync 0
14:47:57:867 FTP Command: RNTO trends.htm
14:47:57:868 040F2180 TriggerDataSent 1304
14:47:57:965 FTP Response: 250 File successfully renamed or moved
14:47:57:965 >|250 File successfully renamed or moved|

14:47:57:965 ! HighLevelAsync 0
14:47:57:965 ! HighLevelAsync done
14:47:58:739 Uploading C:\Cumulus\web\gauges.htm to gauges.htmtmp
14:47:58:739 ! HighLevelAsync 0
14:47:58:740 FTP Command: PORT 192,168,0,196,208,194
14:47:58:742 040F2180 TriggerDataSent 1304
14:47:58:834 FTP Response: 200 PORT command successful
14:47:58:835 >|200 PORT command successful|

14:47:58:835 ! HighLevelAsync 0
14:47:58:835 FTP Command: STOR gauges.htmtmp
14:47:58:836 040F2180 TriggerDataSent 1304
14:48:19:929 FTP Response: 425 Could not open data connection to port 53442: Connection timed out
14:48:19:929 >|425 Could not open data connection to port 53442: Connection timed out|

14:48:19:929 040F2890 TCustomWSocket.Shutdown 1 1320
14:48:20:843 Renaming gauges.htmtmp to gauges.htm
14:48:20:843 ! HighLevelAsync 0
14:48:20:843 FTP Command: RNFR gauges.htmtmp
14:48:20:843 040F2180 TriggerDataSent 1304
14:48:20:931 FTP Response: 350 RNFR accepted - file exists, ready for destination
14:48:20:931 >|350 RNFR accepted - file exists, ready for destination|

14:48:20:931 ! HighLevelAsync 0
14:48:20:931 FTP Command: RNTO gauges.htm
14:48:20:931 040F2180 TriggerDataSent 1304
14:48:21:021 FTP Response: 250 File successfully renamed or moved
14:48:21:021 >|250 File successfully renamed or moved|

14:48:21:021 ! HighLevelAsync 0
14:48:21:021 ! HighLevelAsync done
14:48:21:843 Uploading C:\Cumulus\web\thismonth.htm to thismonth.htmtmp
14:48:21:843 ! HighLevelAsync 0
14:48:21:844 FTP Command: PORT 192,168,0,196,208,206
14:48:21:844 040F2180 TriggerDataSent 1304
14:48:21:933 FTP Response: 200 PORT command successful
14:48:21:933 >|200 PORT command successful|

14:48:21:933 ! HighLevelAsync 0
14:48:21:933 FTP Command: STOR thismonth.htmtmp
14:48:21:933 040F2180 TriggerDataSent 1304
14:48:43:026 FTP Response: 425 Could not open data connection to port 53454: Connection timed out
14:48:43:026 >|425 Could not open data connection to port 53454: Connection timed out|

14:48:43:026 040F2890 TCustomWSocket.Shutdown 1 1368
14:48:43:854 Renaming thismonth.htmtmp to thismonth.htm
14:48:43:854 ! HighLevelAsync 0
14:48:43:854 FTP Command: RNFR thismonth.htmtmp
14:48:43:854 040F2180 TriggerDataSent 1304
14:48:43:942 FTP Response: 350 RNFR accepted - file exists, ready for destination
14:48:43:942 >|350 RNFR accepted - file exists, ready for destination|

14:48:43:942 ! HighLevelAsync 0
14:48:43:942 FTP Command: RNTO thismonth.htm
14:48:43:943 040F2180 TriggerDataSent 1304
14:48:44:034 FTP Response: 250 File successfully renamed or moved
14:48:44:035 >|250 File successfully renamed or moved|

14:48:44:035 ! HighLevelAsync 0
14:48:44:035 ! HighLevelAsync done
14:48:44:854 Uploading C:\Cumulus\web\thisyear.htm to thisyear.htmtmp
14:48:44:854 ! HighLevelAsync 0
14:48:44:855 FTP Command: PORT 192,168,0,196,208,211
14:48:44:855 040F2180 TriggerDataSent 1304
14:48:44:943 FTP Response: 200 PORT command successful
14:48:44:943 >|200 PORT command successful|

14:48:44:943 ! HighLevelAsync 0
14:48:44:944 FTP Command: STOR thisyear.htmtmp
14:48:44:944 040F2180 TriggerDataSent 1304
14:49:06:036 FTP Response: 425 Could not open data connection to port 53459: Connection timed out
14:49:06:036 >|425 Could not open data connection to port 53459: Connection timed out|

14:49:06:036 040F2890 TCustomWSocket.Shutdown 1 1876
14:49:06:855 Renaming thisyear.htmtmp to thisyear.htm
14:49:06:855 ! HighLevelAsync 0
14:49:06:855 FTP Command: RNFR thisyear.htmtmp
14:49:06:855 040F2180 TriggerDataSent 1304
14:49:06:944 FTP Response: 350 RNFR accepted - file exists, ready for destination
14:49:06:944 >|350 RNFR accepted - file exists, ready for destination|

14:49:06:944 ! HighLevelAsync 0
14:49:06:944 FTP Command: RNTO thisyear.htm
14:49:06:944 040F2180 TriggerDataSent 1304
14:49:07:034 FTP Response: 250 File successfully renamed or moved
14:49:07:034 >|250 File successfully renamed or moved|

14:49:07:035 ! HighLevelAsync 0
14:49:07:035 ! HighLevelAsync done
14:49:07:855 Uploading standard images
14:49:07:859 Changing directory to images
14:49:07:859 FTP Command: CWD images
14:49:07:860 040F2180 TriggerDataSent 1304
14:49:08:048 FTP Response: 550 Can't change directory to images: No such file or directory
14:49:08:049 >|550 Can't change directory to images: No such file or directory|

14:49:08:860 FTP Command: TYPE I
14:49:08:861 040F2180 TriggerDataSent 1304
14:49:08:949 FTP Response: 200 TYPE is now 8-bit binary
14:49:08:949 >|200 TYPE is now 8-bit binary|

14:49:09:860 Uploading C:\Cumulus\web\images\wind.png to wind.pngtmp
14:49:09:860 ! HighLevelAsync 0
14:49:09:861 FTP Command: PORT 192,168,0,196,208,215
14:49:09:862 040F2180 TriggerDataSent 1304
14:49:09:949 FTP Response: 200 PORT command successful
14:49:09:949 >|200 PORT command successful|

14:49:09:949 ! HighLevelAsync 0
14:49:09:949 FTP Command: STOR wind.pngtmp
14:49:09:950 040F2180 TriggerDataSent 1304
14:49:31:055 FTP Response: 425 Could not open data connection to port 53463: Connection timed out
14:49:31:056 >|425 Could not open data connection to port 53463: Connection timed out|

14:49:31:056 040F2890 TCustomWSocket.Shutdown 1 1316
14:49:31:864 Renaming wind.pngtmp to wind.png
14:49:31:864 ! HighLevelAsync 0
14:49:31:864 FTP Command: RNFR wind.pngtmp
14:49:31:864 040F2180 TriggerDataSent 1304
14:49:31:956 FTP Response: 350 RNFR accepted - file exists, ready for destination
14:49:31:956 >|350 RNFR accepted - file exists, ready for destination|

14:49:31:956 ! HighLevelAsync 0
14:49:31:956 FTP Command: RNTO wind.png
14:49:31:957 040F2180 TriggerDataSent 1304
14:49:32:047 FTP Response: 250 File successfully renamed or moved
14:49:32:047 >|250 File successfully renamed or moved|

14:49:32:047 ! HighLevelAsync 0
14:49:32:047 ! HighLevelAsync done
14:49:32:864 Uploading C:\Cumulus\web\images\rain.png to rain.pngtmp
14:49:32:864 ! HighLevelAsync 0
14:49:32:865 FTP Command: PORT 192,168,0,196,208,227
14:49:32:866 040F2180 TriggerDataSent 1304
14:49:32:953 FTP Response: 200 PORT command successful
14:49:32:953 >|200 PORT command successful|

14:49:32:954 ! HighLevelAsync 0
14:49:32:954 FTP Command: STOR rain.pngtmp
14:49:32:954 040F2180 TriggerDataSent 1304
14:49:54:060 FTP Response: 425 Could not open data connection to port 53475: Connection timed out
14:49:54:060 >|425 Could not open data connection to port 53475: Connection timed out|

14:49:54:060 040F2890 TCustomWSocket.Shutdown 1 1292
14:49:54:868 Renaming rain.pngtmp to rain.png
14:49:54:868 ! HighLevelAsync 0
14:49:54:868 FTP Command: RNFR rain.pngtmp
14:49:54:868 040F2180 TriggerDataSent 1304
14:49:54:958 FTP Response: 350 RNFR accepted - file exists, ready for destination
14:49:54:958 >|350 RNFR accepted - file exists, ready for destination|

14:49:54:958 ! HighLevelAsync 0
14:49:54:958 FTP Command: RNTO rain.png
14:49:54:958 040F2180 TriggerDataSent 1304
14:49:55:047 FTP Response: 250 File successfully renamed or moved
14:49:55:047 >|250 File successfully renamed or moved|

14:49:55:047 ! HighLevelAsync 0
14:49:55:047 ! HighLevelAsync done
14:49:55:868 Uploading C:\Cumulus\web\images\press.png to press.pngtmp
14:49:55:868 ! HighLevelAsync 0
14:49:55:869 FTP Command: PORT 192,168,0,196,208,233
14:49:55:870 040F2180 TriggerDataSent 1304
14:49:55:958 FTP Response: 200 PORT command successful
14:49:55:958 >|200 PORT command successful|

14:49:55:958 ! HighLevelAsync 0
14:49:55:959 FTP Command: STOR press.pngtmp
14:49:55:959 040F2180 TriggerDataSent 1304
14:50:17:055 FTP Response: 425 Could not open data connection to port 53481: Connection timed out
14:50:17:056 >|425 Could not open data connection to port 53481: Connection timed out|

14:50:17:056 040F2890 TCustomWSocket.Shutdown 1 1316
14:50:17:869 Renaming press.pngtmp to press.png
14:50:17:869 ! HighLevelAsync 0
14:50:17:869 FTP Command: RNFR press.pngtmp
14:50:17:869 040F2180 TriggerDataSent 1304
14:50:17:966 FTP Response: 350 RNFR accepted - file exists, ready for destination
14:50:17:966 >|350 RNFR accepted - file exists, ready for destination|

14:50:17:966 ! HighLevelAsync 0
14:50:17:966 FTP Command: RNTO press.png
14:50:17:966 040F2180 TriggerDataSent 1304
14:50:18:057 FTP Response: 250 File successfully renamed or moved
14:50:18:057 >|250 File successfully renamed or moved|

14:50:18:057 ! HighLevelAsync 0
14:50:18:057 ! HighLevelAsync done
14:50:18:869 Uploading C:\Cumulus\web\images\temp.png to temp.pngtmp
14:50:18:869 ! HighLevelAsync 0
14:50:18:871 FTP Command: PORT 192,168,0,196,208,237
14:50:18:871 040F2180 TriggerDataSent 1304
14:50:18:960 FTP Response: 200 PORT command successful
14:50:18:960 >|200 PORT command successful|

14:50:18:960 ! HighLevelAsync 0
14:50:18:960 FTP Command: STOR temp.pngtmp
14:50:18:961 040F2180 TriggerDataSent 1304
14:50:40:053 FTP Response: 425 Could not open data connection to port 53485: Connection timed out
14:50:40:053 >|425 Could not open data connection to port 53485: Connection timed out|

Thanks .. the site is mycaddisfly.org