Cumulus Support

G'day All,

I've just got myself an XC0348 station, have installed it on the roof etc and setup the webpage, but I'm having a problem with the inside temperature.

Everything else seems to update about every minute EXCEPT for the inside temp that only seems to update every 10 minutes, so when you look at the graphs this one is very 'blocky' is there a way to change this ??

graphs bage

Cheers
Rob

I'm not sure what you think the problem is. It seems to be changing in 0.1 deg C steps, rather than jumping by large amounts, so presumably it's recording what your temperature was at that time? How could it change more often if the temperature hasn't changed by 0.1 degrees? Or am I missing something?

steve wrote:I'm not sure what you think the problem is. It seems to be changing in 0.1 deg C steps, rather than jumping by large amounts, so presumably it's recording what your temperature was at that time? How could it change more often if the temperature hasn't changed by 0.1 degrees? Or am I missing something?

Disregard my last post..... I'm an idiot its just the scale making it look 'blocky' not a problem

Simple thing and it didn't even twig until you said 0.1 deg steps

The gusts on the winds chart are blocky aswell though, and thats definately not a scale issue ??

Cheers for the help

Rob

fireguard wrote:The gusts on the winds chart are blocky aswell though, and thats definately not a scale issue ??

The default for the wind chart is to plot the peak gust in the last 10 minutes; if you prefer, you can change it to plot the last gust value read from the station. Display settings - Graphs - Plot latest gust.