wmr 968 + barometer problem

[Lewis]

hello all,

i have a wmr 968, and today i got my new thermo/hygro/baro sensor replacement..
i noticed that baro is stuck at 1050 hpa, the last month...
you can see it here: http://ye-olde.net/manor/gauges-ss.htm

is that a cumulus misconfiguration ?

[steve]

What pressure is the barometer displaying? What sea-level pressure is the console displaying? Have you set an offset in Cumulus? If the console is correct, turn on the debug log, then we can see the data packets that are being read.

[Lewis]

What pressure is the barometer displaying? What sea-level pressure is the console displaying? Have you set an offset in Cumulus? If the console is correct, turn on the debug log, then we can see the data packets that are being read.

i havent set an offset to cumulus..
console says 1050...

[Lewis]

as you can see here:
http://www.wunderground.com/weatherstat ... span=month

in Nov 3rd, i started using an internal sensor...
it went up to 1050...

[steve]

console says 1050...

Ah, so it's not a Cumulus problem, then. I'm afraid I don't know what the problem is, maybe someone else can offer some advice.

[Lewis]

no, its certainly not a Cumulus problem...

strange thing is that it started after i used an internal sensor as external...

[Lewis]

ok, i'm an idiot
the replacement sensor i bought reports only temperature and humidity..
barometer reports are coming from an internal sensor, which was out of batteries
it was reporting fine internal temp and humidity, but not the baro pressure..

sorry