extra sensor

stsve57 · Post by **stsve57** » Wed 23 Nov 2011 3:58 pm

I have a WMR100. My wind/temp sensor (main outdoor reading on the cumulus software) is not always working and needs to be replaced so I have an extra channel 2 sensor for my temp. reading. Is there anyway to make the extra channel 2 my main outdoor reading??? on the cumulus software. Thanks Steve

Post by **steve** » Wed 23 Nov 2011 4:08 pm

Yes - stop Cumulus and edit Cumulus.ini; in the [Station] section, add a line

WMR200TempChannel=2

and then the channel 2 sensor will be used as the main sensor.

stsve57 · Post by **stsve57** » Thu 24 Nov 2011 5:23 am

Wow cool thanks Steve that worked. If I get a new wind speed sensor do I just take that line back out?? Thanks again for the help.

Post by **steve** » Thu 24 Nov 2011 7:50 am

stsve57 wrote:If I get a new wind speed sensor do I just take that line back out??

If you mean a new 'main' temp/hum sensor, then the answer is yes.

lairgweather · Post by **lairgweather** » Tue 10 Jan 2012 9:56 am

Hi

i have just tried that with my WMR100 vut the only way i can get it to display is by selecting to display the solar data then it shows the temp from the extra channel in that box at the bottom of the cumulus display,but the data being sent to my website and wunderground etc is from the standard sensor that shows 0
cumulus.ini attached

cheers

Post by **steve** » Tue 10 Jan 2012 10:18 am

You've put

WMR100TempChannel=3

should be

WMR200TempChannel=3

as above

Cumulus Support

extra sensor

extra sensor

Re: extra sensor

Re: extra sensor

Re: extra sensor

Re: extra sensor

Re: extra sensor