Page 1 of 1
Cumulus not updating web files
Posted: Wed 02 Nov 2011 2:40 pm
by Lewis
hello all,
i decided to install cumulus last night as the software to view and share my WMR-968's data...
first of all, my outdoor hygro/temp/baro sensor is dead, a new one is on the way over the Atlantic
i followed all the instructions to create my web site (
http://michalopoulos.gr/weather2) but .htm files are not updated locally and they are not uploaded to my server.
only if i click on file/web update they are updatd and uploaded...
what am i doing wrong.. ?
rgds,
George
Re: Cumulus not updating web files
Posted: Wed 02 Nov 2011 2:46 pm
by steve
Have you ticked 'auto update' and set an interval?
Re: Cumulus not updating web files
Posted: Wed 02 Nov 2011 2:52 pm
by Lewis
steve wrote:Have you ticked 'auto update' and set an interval?
yeap...
Re: Cumulus not updating web files
Posted: Wed 02 Nov 2011 2:58 pm
by water01
You are using Active mode FTP which is not a usual setting. I suggest you untick this setting as it is quite likely that your ISP uses Passive mode for FTP.
Re: Cumulus not updating web files
Posted: Wed 02 Nov 2011 3:01 pm
by Lewis
water01 wrote:You are using Active mode FTP which is not a usual setting. I suggest you untick this setting as it is quite likely that your ISP uses Passive mode for FTP.
ok, i changed it.. still no upload..
this is my weather station setup and Cumulus main screen...
Re: Cumulus not updating web files
Posted: Wed 02 Nov 2011 3:03 pm
by steve
Actually, it's probably because of your missing sensor. Cumulus makes various checks before it starts logging and uploading to the internet to make sure it's not recording garbage.
Re: Cumulus not updating web files
Posted: Wed 02 Nov 2011 3:05 pm
by Lewis
is there any way to use the indoor sensor as the outdoor ?
Re: Cumulus not updating web files
Posted: Wed 02 Nov 2011 3:14 pm
by steve
Lewis wrote:is there any way to use the indoor sensor as the outdoor ?
No, only 'extra' sensor channels can be configured as the main outdoor sensor.
Re: Cumulus not updating web files
Posted: Wed 02 Nov 2011 3:18 pm
by Lewis
steve wrote:Lewis wrote:is there any way to use the indoor sensor as the outdoor ?
No, only 'extra' sensor channels can be configured as the main outdoor sensor.
i have an extra sensor, how can i do it ?
Re: Cumulus not updating web files
Posted: Wed 02 Nov 2011 3:40 pm
by mcrossley
WMR928TempChannel=N in cumulus.ini, see...
http://wiki.sandaysoft.com/a/Cumulus.ini
Make sure you stop Cumulus before adding the entry.
Re: Cumulus not updating web files
Posted: Wed 02 Nov 2011 7:39 pm
by Lewis
i think its working fine,now
http://michalopoulos.gr/weather2/
as you see, there is a problem with the encoding..,
we use 8859-7, and some greek words appear as chineese
Re: Cumulus not updating web files
Posted: Wed 02 Nov 2011 7:49 pm
by steve
Lewis wrote:as you see, there is a problem with the encoding..,
Change it, then:
Code: Select all
<meta content="text/html; charset=iso-8859-7" http-equiv="Content-Type" />
Ye-Olde's Weather Station weather - Mozilla Firefox_2011-11-02_19-47-45.png
Re: Cumulus not updating web files
Posted: Thu 03 Nov 2011 12:17 am
by Lewis
steve wrote:Lewis wrote:as you see, there is a problem with the encoding..,
Change it, then:
Code: Select all
<meta content="text/html; charset=iso-8859-7" http-equiv="Content-Type" />
in which file ? directly in index.htm ?
Re: Cumulus not updating web files
Posted: Thu 03 Nov 2011 12:31 am
by beteljuice
In ALL xxxxT.htm files (templates)