I have a WH-1081 and I have a question about the console memory.
Do I have to clear it as it approaches 100% full to allow room for new readings or does it automatically overwrite the oldest readings on a cyclic basis? It is not at all clear from the manual (if that is what you call it!!).
Welcome to the Cumulus Support forum.
Latest Cumulus MX V4 release 4.4.2 (build 4085) - 12 March 2025
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
If you are posting a new Topic about an error or if you need help PLEASE read this first viewtopic.php?p=164080#p164080
Latest Cumulus MX V4 release 4.4.2 (build 4085) - 12 March 2025
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
If you are posting a new Topic about an error or if you need help PLEASE read this first viewtopic.php?p=164080#p164080
Memory
-
daj
- Posts: 2041
- Joined: Tue 29 Jul 2008 8:00 pm
- Weather Station: WH1081
- Operating System: Pi & MX
- Location: SW Scotland
- Contact:
Re: Memory
No, you never need to clear the memory. When the station it full is goes back to the first memory segment and starts over writing it. As long as you have Cumulus plugged in regularly/constantly you will not loose any data