Cumulus Support

I have a WS-2080 weather station from ambient weather running with cumulus and easy weather. It shows as active on wunderground, but the data is not refreshing. It just keeps showing the same data it did when it came online the first time. Any ideas.


http://www.wunderground.com/weatherstat ... =KNYDEPEW2

Hi, welcome to the forum

scottk1979 wrote:...running with cumulus and easy weather

Are you running Cumulus AND EasyWeather at the same time?

If so, It's certainly not the preferred configuration. Far better to close down EW and tell Cumulus to use the FineOffset station type in the config.

daj wrote:Hi, welcome to the forum

scottk1979 wrote:...running with cumulus and easy weather

Are you running Cumulus AND EasyWeather at the same time?

If so, It's certainly not the preferred configuration. Far better to close down EW and tell Cumulus to use the FineOffset station type in the config.

Yes I am. I will shut off EW and see if that causes the data to upload correctly
It seems liek the data is frozen in time right now.

scottk1979 wrote:Yes I am. I will shut off EW and see if that causes the data to upload correctly

If you've had Cumulus and EW both running at the same time, and using the recommended 'Fine Offset' setting in Cumulus, then just stopping EW may not be sufficient to get things going again, as things will have got very confused. You will probably have to restart Cumulus. Use the 'Fine Offset' setting and don't run EW at the same time.