APRS/CWOP
Posted: Sat 28 May 2011 8:45 pm
Did I miss something or does Cumulus not send the rain fall to APRS/CWOP or is that not an option? As rain is not showing up when I run Cumulus with the APRS/CWOP turned on.
Support forum for Cumulus weather station software
https://cumulus.hosiene.co.uk/
Guess that is what I needed is the 24hour rain as that data is what show up for Barberton Oh, in this link when I use VWSaprs and doesn't when I use Cumulus to send data : http://www.wrh.noaa.gov/mesowest/gmap.p ... &density=1steve wrote:It sends 'rain in the last hour' and 'rain since midnight' to CWOP. It doesn't send 'rain in last 24 hours' as it doesn't track that.
My rain shows up: http://www.findu.com/cgi-bin/wx.cgi?call=DW0688. I'm afraid I have no idea why yours apparently doesn't. You'll need to look at the raw data to see what is being sent.
What I have noticed is that if you use an 0900/1000 daily rollover, it's still sending the rain since the rollover rather than 'rain since midnight'. I changed the wxnow.txt code but not the CWOP code. Perhaps that accounts for what you're seeing.
Tracking the rain in the last 24 hours would be quite a large change, so I'm afraid it's unlikely I'll be adding that now.mmorris1 wrote:Guess that is what I needed is the 24hour rain
OK Steve thanks for taking a look..steve wrote:Tracking the rain in the last 24 hours would be quite a large change, so I'm afraid it's unlikely I'll be adding that now.mmorris1 wrote:Guess that is what I needed is the 24hour rain