Cable extension

West Howe Weather · Post by **West Howe Weather** » Wed 04 May 2011 2:38 pm

Hi everyone. I have a PCE-FWS-20 (WH 1081). Please can someone tell me if it is possible to extend (or buy ready made) the cable for the rain sensor.
Steve

Post by **steve** » Wed 04 May 2011 3:32 pm

I believe you can extend it with a standard RJ11 extension cable (suitably protected). If you search this part of the forum for "extension" etc, you should find others who have done it already.

West Howe Weather · Post by **West Howe Weather** » Wed 04 May 2011 3:42 pm

Thanks Steve. I thought it was a RJ11 but wanted to leave it open so I got the rIght info

apenwith · Post by **apenwith** » Thu 05 May 2011 8:53 am

Hi
I had to extend my wind sensors as a neighbour has set up a similar station and it caused data dropouts so my transmitter is now 20M closer to the house. I see no reason why the rain sensor would not work at a similar length. It uses only the centre two pins of the RJ11 plug so phone extension cable is fine.
Regards
Alan

West Howe Weather · Post by **West Howe Weather** » Thu 05 May 2011 9:01 am

Many thanks Alan. I am going to buy the cable of the net over the weekend then resite. Cheers mate

Orion · Post by **Orion** » Thu 05 May 2011 10:20 am

Got one of these a while back for wind vane and anemometer no problems at all with it
10 meter extension
http://www.amazon.co.uk/ADSL-Broadband- ... 32&sr=8-26

Areco747 · Post by **Areco747** » Thu 05 May 2011 5:20 pm

I have the rain gauge with 40 meters of extension without problems. Regards

Cumulus Support

Cable extension

Cable extension

Re: Cable extension

Re: Cable extension

Re: Cable extension

Re: Cable extension

Re: Cable extension

Re: Cable extension