Cumulus Support

Hello,
how is this calculated value <rfallmH #>?
and what does it mean?

Ciao,
come viene calcolato il valore <rfallmH#>?
e cosa significa?

It's the alltime high monthly rain http://wiki.sandaysoft.com/a/Webtags#Rain

Monthly Summary rain March 2011
Day Tot rain
01 78,2mm
02 0,0mm
03 0,0mm
04 0,4mm
05 33,6mm
06 0,3mm
tot monthly 112,5 mm

cumulus calculated 288.6 mm Highest Monthly Rainfall
where mistake?

After startup, it keeps a running total of the monthly total by adding in today's rain so far. If you had an erroneous rain reading, that would get included in the monthly total, so you'll need to correct it. Have you had to correct any rainfall at all this month?

I assume that all-time high figure has a date of this month? What does 'this month' show for rainfall currently on the main screen?

Edit: I found your web site from your profile, so I was able to get answers for some of the above. Your current monthly total is correct, so I don't know where that highest figure came from, unless you did have an erroneous reading.

steve wrote:After startup, it keeps a running total of the monthly total by adding in today's rain so far. If you had an erroneous rain reading, that would get included in the monthly total, so you'll need to correct it. Have you had to correct any rainfall at all this month?

I assume that all-time high figure has a date of this month? What does 'this month' show for rainfall currently on the main screen?

Edit: I found your web site from your profile, so I was able to get answers for some of the above. Your current monthly total is correct, so I don't know where that highest figure came from, unless you did have an erroneous reading.

Can I fix the data manually editing the record to 112.5?
I can send some files? what do you need?

raimaker wrote:Can I fix the data manually editing the record to 112.5?

You can either edit the alltime.ini file manually, with Cumulus stopped, or use the all-time record editor in Cumulus. If this month's total isn't your highest, you can look at the alltimelog.txt file to see what it was before it got changed, so you can set it back again.

correction made ok, thanks steve.