PC No longer recognizing W-8681

Mark19 · Post by **Mark19** » Mon 31 Jan 2011 5:36 pm

Ok, so this morning I accidentally knocked my console of the shelf. The Console was still displaying data, however all firelds in cumulus were at 0. I tried restarting cumulus, then restarting my pc, still nothing. I changed the USB port it was plugged into, and windows didn't say anything about installing drivers, cumulus was still showing 0 s, and EastWeather wouldn't pick it up either. I tried plugging it into my other pc and still nothing.

I then decided to open up the console I checked the board and nothing seems to be loose or had fallen off. Any Ideas?

Thanks,
Mark

Gina · Post by **Gina** » Mon 31 Jan 2011 5:53 pm

Try a complete reset. (Disconnect USB and batteries.)

Mark19 · Post by **Mark19** » Mon 31 Jan 2011 6:56 pm

Thanks for the suggestion, but sadly it didn't work. I left the batteries out for about 20 mins the same with the USB cable.

Mark19 · Post by **Mark19** » Mon 31 Jan 2011 8:41 pm

Well it seems as though the USB port on the console isnt completely dead. I took the batteries out and just started wiggling the usb cable around inside the port, and the backlight was coming on (Power from the USB Port).

philcdav · Post by **philcdav** » Wed 02 Feb 2011 10:58 pm

Hi Mark.

Whip the case off and have a look at the circuit board, especially around the USB area.

Look for cracks, breaks , etc. Use a magnifying glass.

Good luck mate

Cumulus Support

PC No longer recognizing W-8681

PC No longer recognizing W-8681

Re: PC No longer recognizing W-8681

Re: PC No longer recognizing W-8681

Re: PC No longer recognizing W-8681

Re: PC No longer recognizing W-8681