Welcome to the Cumulus Support forum.

Latest Cumulus MX V4 release 4.4.2 (build 4085) - 12 March 2025

Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024

Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)

Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki

If you are posting a new Topic about an error or if you need help PLEASE read this first viewtopic.php?p=164080#p164080

New User .. No Problems :-)

Discussion and questions about Cumulus weather station software version 1. This section is the main place to get help with Cumulus 1 software developed by Steve Loft that ceased development in November 2014.
Post Reply
deejc
Posts: 2
Joined: Sat 04 Dec 2010 2:34 pm
Weather Station: Maplin N96GY
Operating System: Windows 7
Location: Balham, London UK
Contact:

New User .. No Problems :-)

Post by deejc »

Hello, I am a new cumulus and new weather station nut here...
just thought i would say hello, i just purchased a Maplin N96GY and have set it up partially (no wind as sensors are on the floor), Installed Cumulus and set it up to serve pages from my NAS.
Its not up on a pole yet as i cant find any way to mount it, if anyone has any ideas for mounting it that would be great.
i need one of these : http://www.shadeusa.com/beach_umbrella_ ... A%20HOLDER
Image
but its prohibitively expensive to send it from the USA.
I have a slight parapet i can mount it on so the above would be perfect.

I am loving cumulus :clap: and its configurability

Darran
Image
philcdav
Posts: 244
Joined: Tue 24 Jun 2008 9:43 pm
Weather Station: MyDEL WX2008 Mk2 Fine Offset
Operating System: XP and W7
Location: Maghull, nr Liverpool, UK
Contact:

Re: New User .. No Problems :-)

Post by philcdav »

Hi dj.

neat idea but it wouldnt last 5 minutes up here on the Merseyside coast :)

better bet would be an offset (cranked) TV aerial pole that fits into a bolted bracket.

check out your TV shop and look for something like this.

http://www.dastv.co.uk/shop/12_x_12quot ... ed_434.php

The full job including quality rawl-bolts should cost < £25 and last for years.

Dont forget access for servicing, cable run, weather position ( in the clear ) and RF range so the reciever can 'see' the unit.

Also, loads of grease on all the threads !

Good luck and welcome.
Phil - G0DOR
deejc
Posts: 2
Joined: Sat 04 Dec 2010 2:34 pm
Weather Station: Maplin N96GY
Operating System: Windows 7
Location: Balham, London UK
Contact:

Re: New User .. No Problems :-)

Post by deejc »

Thanks Phil,
Unfortunately i live (currently) in a rented flat so can't drill holes in the wall, so i need a mount that can screw on and i have a slight overhang on the roof that is perfect for that type of mount.
Image
Post Reply