Installazione Cumulus per Davis

[ROBY70]

Sera a tutto il forum...

Possiedo una stazione Davis Vantage Pro 2 vorrei usare come software Cumulus ma non riesco a ricevere i miei dati dalla stazione per poi girarli al sito Wunderground...

In attesa di una risposta cordiali saluti Roberto...

[steve]

Is your station USB? Do you get any errors (-32710?) or does nothing at all happen? Please zip up the diags folder and attach it.

[ROBY70]

Is your station USB? Do you get any errors (-32710?) or does nothing at all happen? Please zip up the diags folder and attach it.

Si mi segnala questo errore...Vorrei sapere come impostarla?

Grazie...

[steve]

I don't know whether you are saying that you do get an error, or whether you just want help setting it up

Someone who speaks Italian is going to have to help you...

[ROBY70]

Volevo solo delle informazioni per impostare la mia Davis con il software Cumulus...

[steve]

It's very easy. Run Cumulus and select "Vantage Pro2", "Serial", and enter your COM port number:

VPsettings.png

[ROBY70]

It's very easy. Run Cumulus and select "Vantage Pro2", "Serial", and enter your COM port number:

VPsettings.png

Una cosa ma avendoci il software usb clicco su usb...

[steve]

If you have a USB station, things get complicated. I don't think the USB support in Cumulus works, so you have to use serial.

http://wiki.sandaysoft.com/a/FAQ#I_get_ ... is_station

I really think you are going to have to get help from someone who speaks Italian, sorry.

[ROBY70]

Ok grazie...

[vanjkos]

Roberto, come dice Steve, anche se la tua stazione è USB, imposta Serial per la connessione, e scegli la porta COM che Windows assegna alla stazione. Nel mio caso è la COM3.
Al massimo provale in fila finche non cominci a ricevere i dati dal datalogger!
Non può essere la COM1 o 2, le usb solitamente cominciano da 3 poichè le prime due sono riservate per le seriali, credo.
Ciao!
Vanja

English:
Roberto, as Steve says, even if your station is USB connected, set the connection as Serial and then choose the COM port number that Windows assigns to your station.
At last, you can try them in order and see which one you start getting the data from.
It cannot be COM1 or 2, USBs usually start from 3 because the first two are reserved for the serial ports (I guess ) .

Bye!

[donato06]

good morning everyone
I have a vantage pro 2 usb and I followed the directions of the previous post I can not set it.
the link to the site of Davis to download the utility does not work.
Davis already use and it works with VWs
you could help me ....
sorry for my english...

[steve]

the link to the site of Davis to download the utility does not work.

The link in the FAQ? It works fine for me.

Try following the instructions in this thread:https://cumulus.hosiene.co.uk/viewtopic.php?f=6&t=5574

[donato06]

the link to the site of Davis to download the utility does not work.

The link in the FAQ? It works fine for me.

Try following the instructions in this thread:https://cumulus.hosiene.co.uk/viewtopic.php?f=6&t=5574

Perhaps I have not explained well, I would like to use Cumulus, your link sends me to a discussion on the wind chill ......

Davis for the link gives me this message:
http://imageshack.us/photo/my-images/535/img2hc.jpg/

[steve]

Perhaps I have not explained well, I would like to use Cumulus, your link sends me to a discussion on the wind chill ......

The last digit in the link was cut off. Try https://cumulus.hosiene.co.uk/viewtopic.php?f=6&t=5574

[gemini06720]

Have you managed, yet, to establish communications between your Vantage Pro2 console and Cumulus using the Davis WeatherLink USB adaptor (data logger)?

You mentioned that your station was already 'working' with "VWs" - would that be the AmbientWeather Virtual Weather Station software?