Cumulus Support

Hi Steve,
It stops to work, stops to receive and send data etc.... but i can't find a bugreport for.
After that i'm not able to shutdown the software regulary but i must kill the task to stop and reopen it.
I'm working with version 1.9.0 build 958. My Station is a PCE-PWS20.
First i tought because i'm working with a usb-ethernet hub it losts connection, but with direct connection to the PC i had the same result.

Thanks for you help.

greets

Is this for the same problem as in the other thread that you started, or a different problem?

You have problems with your USB connection to your station:

11/11/2010 23:57:38.296 : 23:57:38 EWUSB: HidControl Device Unplug
11/11/2010 23:57:38.296 : EWUSB: HidControl Device Removal

12/11/2010 15:12:02.484 : Error!!! Failed to write to USB!

13/11/2010 07:04:37.546 : 07:04:37 EWUSB: HidControl Device Unplug
13/11/2010 07:04:37.546 : EWUSB: HidControl Device Removal

13/11/2010 08:29:16.000 : 08:29:16 EWUSB: HidControl Device Unplug
13/11/2010 08:29:16.000 : EWUSB: HidControl Device Removal

13/11/2010 15:57:06.343 : EWUSB: HidControl Device Removal
13/11/2010 15:57:06.343 : 15:57:06 EWUSB: HidControl DeviceChange

13/11/2010 16:58:05.656 : Error!!! Failed to write to USB!

Hi Steve,

I think i found the problem, the box saying " restart if unplugged " was not marked.
Further the option in the USB root Hub "allow computer to turn off this device to save power" was set.
I'm testing now if this works.

Thanks for all your help.

Claude

cgoetz wrote:I think i found the problem, the box saying " restart if unplugged " was not marked.

That's just a hack and not the solution to the problem. If the station is disconnected, rarely will restarting Cumulus have any effect.

Further the option in the USB root Hub "allow computer to turn off this device to save power" was set.

That may well help. You need to make sure you have any power-saving options turned off (except for displays etc).

Hi Steve,

Seems it works fine now, i think this was the problem.

Now i have in my graphs extremly high values, where can i change them, in order that my graph get smaler ( see Printscreen )

thanks for your help.

Those min and max figures are taken from dayfile.txt; because of the problem of not getting data from the station, you will have a few 'default' entries in there which you need to delete (with Cumulus stopped). Make sure you don't leave blank lines in the file.

Hi Steve,

Ok, everything seems to work fine now...

Thanks for all help.....