after of running for 2 years my weather stop sending after i change batteries
easy weather model 265 nc please help the red light flash every 25 sec
it has a dcf radio clock
Welcome to the Cumulus Support forum.
Latest Cumulus MX V4 release 4.4.2 (build 4085) - 12 March 2025
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
If you are posting a new Topic about an error or if you need help PLEASE read this first viewtopic.php?p=164080#p164080
Latest Cumulus MX V4 release 4.4.2 (build 4085) - 12 March 2025
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
If you are posting a new Topic about an error or if you need help PLEASE read this first viewtopic.php?p=164080#p164080
sending unit not working
-
slonesy
- Posts: 1
- Joined: Sat 28 Aug 2010 9:46 pm
- Weather Station: easy weather model 265 nc
- Operating System: window xp
sending unit not working
Last edited by slonesy on Sun 29 Aug 2010 12:11 pm, edited 3 times in total.
- steve
- Cumulus Author
- Posts: 26672
- Joined: Mon 02 Jun 2008 6:49 pm
- Weather Station: None
- Operating System: None
- Location: Vienne, France
- Contact:
Re: sending unit not working
Is the red light on the remote sensor flashing every 48 seconds? If so, it's probably working, but I believe there is a procedure which you can try to get the station to pick it up again. Unfortunately I cannot remember what you need to do at the moment, but hopefully someone will be able to advise.
Steve
-
wd40
- Posts: 448
- Joined: Thu 05 Aug 2010 10:02 pm
- Weather Station: WS2080
- Operating System: W7
- Location: GA, USA
- Contact:
Re: sending unit not working
Mine is a newer one but this might help. Make sure you have the sensors up and running or hope they are. Take the batteries out of the console(receiver). Wait for a few seconds then put them back in. Do not touch any of the buttons till the console finds the sensor signal.
Make sure you are not too close. I think within 10 feet is too close.
Make sure you are not too close. I think within 10 feet is too close.
-
Gina
- Posts: 1885
- Joined: Sat 21 Feb 2009 12:41 pm
- Weather Station: Nothing working ATM - making one
- Operating System: OS X, Linux Mint, Win7 & XP
- Location: Devon UK
Re: sending unit not working
And make sure the USB is disconnected or your console will get power that way. On the transmitter, you should get a long red light after putting the batteries in followed by a flash every 48 seconds. That's for the version without the DCF radio clock.
Gina
Sorry, no banner - weather station out of action. Hoping to be up and running with a new home-made one soon.
Sorry, no banner - weather station out of action. Hoping to be up and running with a new home-made one soon.