Cumulus Support

Hello

I am just using cumulus 1.8.9(897) and found probably a bug. If you open Windrichtung the red value in my eyes is the middle value and the middle value is the wind direction!?
http://www.richert.ch/wetter/cumulus-v1/trends.htm

Also a small problem in realtime
I already exchanged the labels in my webpage, but it seems, that Windspeed and Wind Gust are swapped!?
http://www.richert.ch/wetter/cumulus-v1 ... ltime.html

Greetings from switzerland
Joe

btw. I managed it now, that the sw is running parallel with my virtual weather station on PC1 and cumulus on PC2. I use a moxa serial to lan converter with the newest drivers....

jrichert wrote:I am just using cumulus 1.8.9(897) and found probably a bug. If you open Windrichtung the red value in my eyes is the middle value and the middle value is the wind direction!?
http://www.richert.ch/wetter/cumulus-v1/trends.htm

This was fixed in build 918.

Also a small problem in realtime
I already exchanged the labels in my webpage, but it seems, that Windspeed and Wind Gust are swapped!?
http://www.richert.ch/wetter/cumulus-v1 ... ltime.html

No, not really. It's because the VP2 doesn't have a 'gust' as such. The gust gauge shows the 3-second speed from the station (and the peak values of that), and the speed gauge shows the average speed (10 minutes by default). So in VP2 terms, it's OK to call the left hand gauge 'speed', but the middle one isn't 'gust', if you want to change the label you should probably call it 'average' or something like that.

Hi Steve

Thanks for the infos, the I will try the newest build and correct me meters back again.

Greetings from switzerland, I will go out and make some photos from Orion, we have a very nice sky and also new moon...