TP1080WC Proweatherstation

[Hardwicke]

I have TP1080wc station and have installed Cumulus so that I can upload to weather underground.
The wind speed differs on the touch screen as opposed to cumulus I have tried to scale it down by calibration but cannot seem to get it right is there a specific figure I should be using for these 2 bits of kit?

[steve]

The wind speed differs on the touch screen as opposed to cumulus I have tried to scale it down by calibration

The calibration settings aren't for getting the console and Cumulus to agree; they do that already. The calibration settings are for compensating for the siting of your anemometer etc.

Have you seen this: http://wiki.sandaysoft.com/a/FAQ#What_d ... tations.3F?

[malc-c]

I think you'll find the figure shown on the Wind speed on the console is the average wind speed, which matches the average wind speed in Cumulus.