1.8.9 build 913

Charlie · Post by **Charlie** » Mon 15 Feb 2010 12:01 pm

I tried out Cumulus 1.8.9 build 913 last night. Everything seemed to be working fine when I went to bed. This morning, most things are good, but nothing happens when I attempt to view graphs. Everything else seems to be fine - including "select-a-graph". Thoughts? Would you like me to capture anything for you before I try to restart it, or go back to the previous version?

Post by **steve** » Mon 15 Feb 2010 12:16 pm

It's probably the change I put in to stop the freezing line appearing when it's below the axis, but I don't know why it would stop the window opening. Have a look in the latest diags file to see if any errors are logged. If not, I will probably have to take out the fix and we'll have to put with the line slightly off the graph sometimes.

Charlie · Post by **Charlie** » Mon 15 Feb 2010 12:29 pm

I don't see any obvious errors (other than FTP), but I've attached the file for you in case I missed something (being a newbie).

Synewave · Post by **Synewave** » Mon 15 Feb 2010 12:40 pm

All of the Cumulus graphs are working fine for me. I upgraded to 913 this morning.

Post by **steve** » Mon 15 Feb 2010 12:47 pm

You're right, there's no indication of the problem there. You could try restarting, or going back to the previous build, whichever you want.

Are you uploading to a web site? If so, are the graphs being produced OK?

Charlie · Post by **Charlie** » Mon 15 Feb 2010 12:55 pm

The graphs are fine on the website.

Post by **steve** » Mon 15 Feb 2010 1:00 pm

Possibly nothing to do with the recent change, then. Could you show me the outside temperature graph and the min/max/avg graph, please?

Charlie · Post by **Charlie** » Mon 15 Feb 2010 1:16 pm

I've disabled updating the website so you can have a look. It's here:
http://www.windblownsolutions.com/test/ ... trends.htm

Post by **steve** » Mon 15 Feb 2010 1:18 pm

Thanks. I wonder if it's because your freezing line is off the top of the graph. I'll investigate. Do you have the 'show freezing line' option set?

Charlie · Post by **Charlie** » Mon 15 Feb 2010 1:37 pm

Yes, "show freezing line" was set. I turned it off, but the graphs did not start appearing again. After a few minutes more, I did a restart and the graphs came back.

Post by **steve** » Mon 15 Feb 2010 1:49 pm

None of it makes any sense. It's producing the graphs OK, and the code which opens the window doesn't have anything in it that's changed recently.

Charlie · Post by **Charlie** » Tue 16 Feb 2010 12:48 pm

Somewhere overnight it happened again, so I switched back to 1.88 build 881, at least until I finish playing with the wind direction vane because I sort of need graphs to do that.

I have a feeing my highly loaded machine is going to be a nasty test bed.

Cumulus Support

1.8.9 build 913

1.8.9 build 913

Re: 1.8.9 build 913

Re: 1.8.9 build 913

Re: 1.8.9 build 913

Re: 1.8.9 build 913

Re: 1.8.9 build 913

Re: 1.8.9 build 913

Re: 1.8.9 build 913

Re: 1.8.9 build 913

Re: 1.8.9 build 913

Re: 1.8.9 build 913

Re: 1.8.9 build 913