Page 2 of 2

Re: what weather station do you recommend

Posted: Wed 12 Mar 2025 4:20 pm
by Mapantz
RayProudfoot wrote: Wed 12 Mar 2025 11:39 am The Vue updates wind every 30 seconds I think.
2.5 seconds, like the VP2

Re: what weather station do you recommend

Posted: Wed 12 Mar 2025 4:37 pm
by RayProudfoot
Mapantz wrote: Wed 12 Mar 2025 4:20 pm
2.5 seconds, like the VP2
In that case it’s a viable alternative.

Re: what weather station do you recommend

Posted: Thu 13 Mar 2025 6:42 am
by Mincek
PaulMy wrote: Wed 12 Mar 2025 2:35 pm Hi,

The Davis VP2 outside ISS is basically the same as it has been and can be purchased on its own (without a console).

The Inside console has 3 options:
1. The new Weatherlink Console that replaces the now not-available old style console. This can upload to Weatherlink.com. Currently there is no direct connect locally from this console and CumulusMX would get the data from Weatherlink.com cloud. Catchup of archive data is available only with a paid Weatherlink.com subscription. https://www.komokaweather.com/cumulusmx4/index.htm

2. The Weatherlink Live which uploads to Weatherlink.com. CumulusMX can access the local near-live data in the same way as with the previous console/datalogger setup. Catchup of archive data is available from Weatherlink.com only with a paid subscription.

3. The Envoy console is still available and can be used with the serial/USB or an IP datalogger in the traditional way. Catchup of archive data is done from the datalogger https://www.davisinstruments.com/produc ... ther-envoy

Weatherlink PC software is still available (free) but is no longer maintained/updated https://support.davisinstruments.com/ca ... r-link-com
There is nothing about connection to Raspbery.
As you are aware CumulusMX does work well with the RPi so any of the console options will work with CumulusMX/RPi

Enjoy,
Paul
OK, like I wrote it`s more complicated than I thinking ;/

I don`t wanna any pay subscriptions, but I don`t understand exactly this options ;/

If I will buy station without any console then no possible to send data to my website with CumulusMX
so i have to buy Console, and the cheapest is console Envoy ?? and then connected this console with cable to RPI ??

If I will buy station with Weatherlink Touch Console 6313EU then I will be do not have any archive data ?? only live ?? CumulusMX will not download to my server ftp ??

did I understand everything OK ?

Thanks for helping me.

Re: what weather station do you recommend

Posted: Thu 13 Mar 2025 9:39 am
by mcrossley
Mincek wrote: Thu 13 Mar 2025 6:42 am OK, like I wrote it`s more complicated than I thinking ;/

I don`t wanna any pay subscriptions, but I don`t understand exactly this options ;/

If I will buy station without any console then no possible to send data to my website with CumulusMX
Correct.
Mincek wrote: Thu 13 Mar 2025 6:42 am so i have to buy Console, and the cheapest is console Envoy ?? and then connected this console with cable to RPI ??
The Envoy will also require a data logger, it uses the same data loggers that the old VP2 console used.
Mincek wrote: Thu 13 Mar 2025 6:42 am If I will buy station with Weatherlink Touch Console 6313EU then I will be do not have any archive data ?? only live ?? CumulusMX will not download to my server ftp ??
The new 6313 console does not provide ANY data locally. It only uploads to the Davis WeatherLink.com cloud service.
Cumulus MX can only download your "live" data at one-minute intervals from wl.com and downloading both live and historic data requires you to buy a subscription.