Page 1 of 1
b4064 Chart Select-a-Period
Posted: Tue 10 Dec 2024 4:17 pm
by wurzelmac
Can anybody check the chart "Select-a-Period" within the MX dashboard, please. Is this extreme indoor temperature only here on my side? Btw, this is the only chart that has this issue. All others are showing the value correct. Thanks in advance.
Re: b4064 Chart Select-a-Period
Posted: Tue 10 Dec 2024 4:26 pm
by wurzelmac
Ah I see the same behavior in AI2 dashboard.
Re: b4064 Chart Select-a-Period
Posted: Tue 10 Dec 2024 4:31 pm
by broadstairs
Well no I only see normal values although not sure what pelletslager is
anyway major difference on mine is that I have two scales on the left side and one on the right. Not sure if that makes a difference, I have temp and mph on left and humidity on right!
Stuart
Re: b4064 Chart Select-a-Period
Posted: Tue 10 Dec 2024 4:45 pm
by wurzelmac
Thanks for looking, then I have to investigate here on my side. (Pelletslager is an extra temp sensor in a wood storage room.)
Re: b4064 Chart Select-a-Period
Posted: Tue 10 Dec 2024 5:28 pm
by broadstairs
I just realised that yours looks like the AI, does it work on the normal dashboard? I don't use the AI at all. I just tried the AI and it seems OK for me.
Stuart
Re: b4064 Chart Select-a-Period
Posted: Tue 10 Dec 2024 5:31 pm
by PaulMy
Hi,
No, I don't see any abnormalities in my installs for Indoor Temp.
Enjoy,
Paul
Re: b4064 Chart Select-a-Period
Posted: Tue 10 Dec 2024 5:42 pm
by wurzelmac
broadstairs wrote: ↑Tue 10 Dec 2024 5:28 pm
I just realised that yours looks like the AI, does it work on the normal dashboard? I don't use the AI at all. I just tried the AI and it seems OK for me.
Stuart
On both the MX and AI2 dashboards, see my first post (MX) and the second (AI2).
Re: b4064 Chart Select-a-Period
Posted: Tue 10 Dec 2024 5:49 pm
by wurzelmac
Maybe it has something to do with decimal (point vs comma), because the value is exact multiplied by 10 - waiting for the weekend till Mark chimes in.
Re: b4064 Chart Select-a-Period
Posted: Tue 10 Dec 2024 6:21 pm
by PaulMy
I've looked in my Cumulus.ini and there are a couple of InTemp settings.
Code: Select all
InTempOffset=0
InHumOffset=0
InTempMult=1
InHumMult=1
Anything abnormal in yours?
Enjoy,
Paul
Re: b4064 Chart Select-a-Period
Posted: Tue 10 Dec 2024 7:03 pm
by wurzelmac
Thanks, Paul, but it is really ONLY THIS very graph that is scaling indoor temp wrong. All ok with simply all other graphs, gauges, values, etc. both local within the dashboards as well as online on my website.
Re: b4064 Chart Select-a-Period
Posted: Wed 11 Dec 2024 12:32 pm
by wurzelmac
I would like to add three screenshots to demonstrate what is happening.
Chart "Recent-Select-a-Chart" scales Indoor Temp correct.
Chart "Select-a-Period" scales Indoor Temp wrong (multiplied with 10), as soon as I hit "Clear Series" the chart is correct again.
And all other places that display Indoor Temp do display the value correct, as I have investigated so far.
Re: b4064 Chart Select-a-Period
Posted: Wed 11 Dec 2024 3:07 pm
by mcrossley
Could you check what data this returns please...
http://<MX_IP_ADDRESS>:8998/api/graphdata/intvtemp.json?start=1731283200&end=1733875200
Re: b4064 Chart Select-a-Period
Posted: Wed 11 Dec 2024 3:52 pm
by wurzelmac
This is the output what it returns. I copied it and saved it as a .txt file.
Re: b4064 Chart Select-a-Period
Posted: Wed 11 Dec 2024 4:46 pm
by mcrossley
Thanks, found the problem, and yep comma decimals!
Re: b4064 Chart Select-a-Period
Posted: Wed 11 Dec 2024 5:34 pm
by wurzelmac
Wow, concerns only this single chart. Thanks for taking time.