Cumulus Support

Hi Hans,

I have two issues with the latest release. An error while processing the website and incomplete humidity information.

Could you please post the complete MXDiags .txt file where the error occurred, it is very difficult to diagnose anything from the snippet you have posted.

water01 wrote: ↑Thu 05 Dec 2024 7:52 am Could you please post the complete MXDiags .txt file where the error occurred, it is very difficult to diagnose anything from the snippet you have posted.

Please note that @stigian's issue is related to CUtils and not CMX (afaics now) so let me analyse first before deciding it is CMX (which I think it is not).

@stigian:

1. It seems your lsb_release is not installed. afaik it is part of the linux distri and it should be there do lsb_release -a. If it is not, please run the following:

   Code: Select all

   apt-get update && apt-get install -y lsb-release && apt-get clean all

   It may be caused by a change you made to the system. Please note the difference of lsb_release (used in CUtils) and lsb-release (used in the given command). That may be a change in linux I did not anticipate.
2. There is nothing wrong with Humidity, I only removed the redundant info. Now it is like e.g. Temperature (or Pressure or Rain), immediately followed by the temperature. It creates room for other info which I may add in a later stage.

Hi Hans,

lsb-release : Fixed, thanks for the code snippet. Thanks for the update for the humidity piece. It seems like such a big field now with little info

Stigian wrote: ↑Thu 05 Dec 2024 10:33 am Hi Hans,

lsb-release : Fixed, thanks for the code snippet. Thanks for the update for the humidity piece. It seems like such a big field now with little info

Yes... suggestions for what to fill in are welcome!

HansR wrote: ↑Thu 05 Dec 2024 11:45 am

Stigian wrote: ↑Thu 05 Dec 2024 10:33 am Hi Hans,

lsb-release : Fixed, thanks for the code snippet. Thanks for the update for the humidity piece. It seems like such a big field now with little info

Yes... suggestions for what to fill in are welcome!

it would be nice to display min and max values for both values, or configurable, for a single one. Actually like already for temperature, etc.

Stigian wrote: ↑Thu 05 Dec 2024 11:56 am it would be nice to display min and max values for both values, or configurable, for a single one. Actually like already for temperature, etc.

Currently only fields in realtime.txt can be displayed in the realtime dashboard

There is another issue with the snow chart:
alldailysnow.json is uploaded to the same directory as all the other charts-files on the web, but Cutils expect to find it in the utils-directory.
If I copy it over it is displayed.

sutne wrote: ↑Thu 05 Dec 2024 3:20 pm There is another issue with the snow chart:
alldailysnow.json is uploaded to the same directory as all the other charts-files on the web, but Cutils expect to find it in the utils-directory.
If I copy it over it is displayed.

OK, my bad. I tried to load the json twice, once without the CumulusRealTimeLocation.
Find attached 7.3.1 beta 2 with a corrected Diary module (Note this has an added correction to the beta 1 for Dador).

Managed to update this morning. Snow charts is ok with beta 2.
But there is a difference between Table view and Chart. Snow fall is missing for 16 and 17 nov in the table view. Correct in chart.

sutne wrote: ↑Fri 06 Dec 2024 6:18 am Managed to update this morning. Snow charts is ok with beta 2.
But there is a difference between Table view and Chart. Snow fall is missing for 16 and 17 nov in the table view. Correct in chart.

Thanks. Ah... you switched to Rjoanddalen

Strange diff between table and chart. Could you post me your db so I can debug?

@Steinar: (@Mark: useful of you read this)

Thanks for the database.

If you look at the attached screenshot of the db-browser Browse Data result of your database. You say it was converted during the beta test and that seems to have worked well though some old records remained: the first 8 records are old and as such invalid for the new situation.

However, the date is still the same so when querying for data - after reading al records - CUtils takes the first record of a certain date. If any duplicate it simply ignores multiple date records. But as it does not take into account it will find data from the old database, it takes the first for the 16th and the 17th.

It may be the conversion did not go perfect (did it convert at all?), That needs to be checked @Mark?

My advise would be to use DbBrowser and remove all records from the old situation.
Than the Diary report should be fine.
(btw: there are more records in the db than you see, that does not change my analysis)

And one additional remark: apparently CMX ignores the original record, I don't know why, would need to analyse the CMX query on the Diary.
But that's the only possibility to have a correct chart and an invalid report: the chart is made on the data from CMX.

Thank you.
I do not need the old data.
I have ordered a LDS01 and hope to have automated readings from when it arrives.
I planned to update the diary until then to have a full season. The data I read from the nearest meteorological station.
I can start all over again.

Great!