Page 1 of 4
CMX4.3 with Ecowitt GW2000 Gateway and LDS01 Laser Depth Sensor
Posted: Wed 04 Dec 2024 8:23 pm
by PaulMy
The LDS01 is ordered and expected to ship at the end of December. I have received the GW2000 IOT Wi-Fi Hub and want to connect it with CMX. I previously had 2 GW1000 gateway but these are no longer operating, and I've forgotten how to connect them. The GW2000 appears to be both WiFi and Ethernet connection. Which is the preferred connection? I intend to have the LDS01 about 30 feet from the house, brick wall, and about 35 feet inside to the router.
Enjoy,
Paul
Re: CMX4.3 with Ecowitt GW2000 Gateway and LDS01 Laser Depth Sensor
Posted: Thu 05 Dec 2024 10:39 am
by broadstairs
Paul I have the GW2000 and found that it works well on both Ethernet and wi-fi (with the usual issue of only 2.4ghz of course). Mine is at the front of a 100 years old house and picks up my WS80 and WH40 very well which are in the garden at the back some 30 feet away (don't have a large garden!). So unless your house has unusual construction it should work fine. I do currently have it on Ethernet as it is only 3 feet from my router!
Stuart
Re: CMX4.3 with Ecowitt GW2000 Gateway and LDS01 Laser Depth Sensor
Posted: Thu 05 Dec 2024 11:53 am
by HansR
My GW1100 is behind a double brick wall receiving all sensors from 20m (to the east, window in between) and 40 m ( the WS80 to the north through the brick wall in open terrain). No issues so far though the soil moisture (20m) sometimes has reception issues.
In summary: I think your 60 feet with a brick wall should give no problems.
Re: CMX4.3 with Ecowitt GW2000 Gateway and LDS01 Laser Depth Sensor
Posted: Fri 13 Dec 2024 9:18 pm
by weernoordbergum
I use a GW2000 as a extra sensors station on my CumulusMX v4
The GW2000 is a very reliable internethub and receives my sensors well
I have a temp/hum sensor in the attic, it receivers through 2 concrete ceilings at about 8 meters up
Back yard, 20 meters is no problem, I never had a connection error, also firmware upgrade is easily done, CumulusMX is able to detect a new firmware version available through the alarm settings it can be displayed in the bottom section of the CumulusMX dashboard
I also have a Davis station and it works fine, except the price of replacement parts and extra sensors is high compared to Ecowitt sensors and parts
I use the wireless connection of the GW2000 to my LAN and this works well
Using the wired LAN gave me some problems when using the Ecowitt protocol and custom server to upload to CumulusMX, it gave a network error
But that maybe a routing issue
I also have an Ecowitt console which I use for uploading sensor data to CumulusMX, and that gives no problems
I run CumulusMX on a Raspberry PI which reads data from my meteobridge Nano, works great
Re: CMX4.3 with Ecowitt GW2000 Gateway and LDS01 Laser Depth Sensor
Posted: Fri 13 Dec 2024 9:25 pm
by PaulMy
I use the wireless connection of the GW2000 to my LAN and this works well
Using the wired LAN gave me some problems when using the Ecowitt protocol and custom server to upload to CumulusMX, it gave a network error
But that maybe a routing issue
Thanks. I haven't set it up yet but likely will use WiFi. That is how I had the previous GW1000
Enjoy,
Paul
Re: CMX4.3 with Ecowitt GW2000 Gateway and LDS01 Laser Depth Sensor
Posted: Tue 31 Dec 2024 5:03 pm
by PaulMy
Some delay...
Ecowitt
Dear Customers,
Thank you for your interest and support for the LDS01! To ensure long-term reliability and performance in challenging environments, we have added a heating module during the development process. This feature improves measurement accuracy by addressing the impact of moisture. However, it has also increased power consumption.
Additionally, adjustments to the design and raw materials have led to higher production costs. Despite this, all pre-order customers will receive the updated version of the LDS01 at the original price, without any additional charges.
To implement these enhancements, including an extra battery compartment with every unit, the delivery of LDS01 will be delayed by 60 days to allow for production and testing.
We sincerely apologize for any inconvenience this may cause and deeply appreciate your understanding. We are confident that the optimized LDS01 will provide an exceptional user experience. Should you have any questions, feel free to reach out to us.
Thank you for your continued support!
— The Ecowitt Team
Ecowitt
BEVERLY HOUSE，93-107 LOCKHART ROAD
FLAT/ROOM 1802
WANCHAI
Hong Kong Island Hong Kong SAR
All I can do is wait, and keep doing what I have been doing every day
Enjoy,
Paul
Re: CMX4.3 with Ecowitt GW2000 Gateway and LDS01 Laser Depth Sensor
Posted: Wed 01 Jan 2025 5:02 pm
by sutne
IMG_0364.jpeg
With a battery package!
I was wondering how laser would function in a blizzard with wet snow filling the housing.
With a heating and a extra battery package this would maybe not be a problem.
Re: CMX4.3 with Ecowitt GW2000 Gateway and LDS01 Laser Depth Sensor
Posted: Wed 01 Jan 2025 5:34 pm
by mcrossley
I think the heater is for condensation on the lens isn't it? The sensor will normally be pointing downwards, so accumulation on the sensor should not be a problem.
Re: CMX4.3 with Ecowitt GW2000 Gateway and LDS01 Laser Depth Sensor
Posted: Wed 01 Jan 2025 5:59 pm
by sutne
Snow blizzard with wet snow fills up everywhere.
You should see my WS80 sometimes!
Re: CMX4.3 with Ecowitt GW2000 Gateway and LDS01 Laser Depth Sensor
Posted: Wed 01 Jan 2025 7:52 pm
by mcrossley
Re: CMX4.3 with Ecowitt GW2000 Gateway and LDS01 Laser Depth Sensor
Posted: Fri 24 Jan 2025 3:11 pm
by lse-cumulus
FYI
got an email from Ecowitt Shop/Shopify today that my pre-sale ordered LDS01 sensor has been dispatched and is now in transit ...
let's wait for arrival (usually takes 10 days from China to Austria)
Re: CMX4.3 with Ecowitt GW2000 Gateway and LDS01 Laser Depth Sensor
Posted: Fri 24 Jan 2025 4:05 pm
by PaulMy
I am tracking mine...
Code: Select all
Shipment Information Order Number xxxxxxxxxxxxxxx Country CN-CA
Friday January,24,2025
14:44:31 Local time Shipment is in transit to next facility Mainland China, CN
00:35:27 Local time Departed from sort facility Mainland China, CN
Thursday January,23,2025
22:39:22 Local time Arrived at origin facility Mainland China, CN
11:39:02 Local time Shipment information received
So far in January we've had 20 days with new snow, and all days with snowpack.
For January, the 20 days with 24-hr snow is a record for me since 2011 and more snow in the forecast. However the total amount of new snow is still lower than many other past years.
Enjoy,
Paul
Re: CMX4.3 with Ecowitt GW2000 Gateway and LDS01 Laser Depth Sensor
Posted: Fri 31 Jan 2025 6:25 pm
by PaulMy
It is getting closer...
Code: Select all
Latest updates
Date Time Progress Jan. 30 11:51 am
Item has been presented to Canada Border Services Agency for customs review.
Mississauga, ON
Now updated on Friday January 31:
Code: Select all
Expected delivery Today
Updated: Today at 1:21 pm
Origin Mississauga, ON
Check delivery progress Received by Canada Post
Expected delivery Today
I'd better start by connection the GW2000. I think I have it correct as I can access the IP: 10.0.0.185/localNetwork.html and Live Data shows my indoor temp and Humidity (same as my CMX shows). Pressure needs to be calibrated so will have to look into that.
And now going to the Post Office and see if they have it
Enjoy,
Paul
Re: CMX4.3 with Ecowitt GW2000 Gateway and LDS01 Laser Depth Sensor
Posted: Fri 31 Jan 2025 6:56 pm
by HansR
thriller
Re: CMX4.3 with Ecowitt GW2000 Gateway and LDS01 Laser Depth Sensor
Posted: Fri 31 Jan 2025 7:31 pm
by PaulMy
Check delivery progress Received by Canada Post
Expected delivery Today
False alarm
Post Office says still in customs, expect it next week
And I wanted to be ready...
Code: Select all
The 5-day Forecast for London/Middlesex, Ontario, Canada
Friday - Rain mixed with snow. Highs 1 to 3C and lows -13 to -11C.
Saturday - More sun than clouds. Highs -9 to -7C and lows -13 to -11C.
Sunday - Periods of snow. Highs 0 to 2C and lows -1 to 1C.
Monday - Mix of rain and snow showers. Highs 2 to 4C and lows -9 to -7C.
Tuesday - More clouds than sun. Highs -5 to -3C and lows -7 to -5C.
Wednesday - Snow showers possible. Highs -2 to 0C and lows -5 to -3C.
Enjoy,
Paul