Page 1 of 1
AWEKAS Data Transmission
Posted: Thu 21 Nov 2024 10:45 am
by nking
I'm still using Cumulus 1 but have just had emails from AWEKAS "Your station Hurstpierpoint has not sent any data to AWEKAS Weather Network since 19.11.2024 00:20local time.
Please check if there is a problem with the transmission, software or your weather station."
I have checked my configuration
http://www.pc-king.me.uk/awekas_wl.htm and everything appears OK. Is anyone else experiencing a problem?
Cheers
Re: AWEKAS Data Transmission
Posted: Thu 21 Nov 2024 1:24 pm
by wurzelmac
Hello Neil,
you can check some things via the followning link:
https://www.awekas.at/de/check.php?id=xxx
where xxx = is your AWEKAS ID
Hope this helps,
Re: AWEKAS Data Transmission
Posted: Thu 21 Nov 2024 4:04 pm
by mcrossley
I appear to me sending on - I'm using Cumulus MX though.
Re: AWEKAS Data Transmission
Posted: Thu 21 Nov 2024 4:36 pm
by nking
Thank you for responding. I'm seeing this from AWEKAS "Security blocking - please contact
mail@awekas.at". I've no idea why this should suddenly happen, I'll email AWEKAS to find out.
Re: AWEKAS Data Transmission
Posted: Thu 21 Nov 2024 5:04 pm
by PaulMy
Hi, I took too long to respond as you have noticed the same error. Still posting this though as I can confirm the CU1 method still worked fine for me. If that helps in your contact with AWEKAS.
That link provided by Reinhart and using your station #7965 shows an error.
Code: Select all
User setting and data check for station Hurstpierpoint
check result notice
1.) User profile active
2.) Transfer mode: Cumulus Datafile to help
3.) Data file accessible Security blocking - please contact mail@awekas.at
= OK / = error
Like Mark, mine was updating ok with CumulusMX. But I have now temporarily changed in AWEKAS settings changed the source to use the CU1 upload file and that also updates ok for mine. So looks like as noted, Security blocking and to contact AWEKAS.
Enjoy,
Paul
Re: AWEKAS Data Transmission
Posted: Sat 23 Nov 2024 11:08 am
by nking
Contacted AWEKAS and they fixed the fault their end, all working again from 22nd Nov 13:00hrs
