Page 1 of 4
v7.2.0 b1
Posted: Fri 06 Sep 2024 4:22 pm
by PaulMy
Hi Hans,
I have it at
https://www.komokaweather.com/cumulusmxwll/index.html and all seems good.
The Frost Days addition is very nice. Will be nice when the Snow is added.
The Info button is a great explanation. At first it didn't pop up for me and thought I may have missed something, but then after several minutes the popups did work. Likely some cache with my site.
Great work.
Enjoy,
Paul
Re: v7.2.0 b1
Posted: Fri 06 Sep 2024 4:40 pm
by HansR
Thanks Paul.
Winter is more important at some places than at other places I guess
The Diary addition will be nice I guess.
Re: v7.2.0 b1
Posted: Sat 07 Sep 2024 6:44 am
by meteosangonera
Great HansR.
Very good work. I already have it up and running on my website.
https://www.meteosangonera.es/graficasclimaticas/
Although I won't be able to use Ice Days in my area (the lowest maximum temperature recorded in my area with data since 1940 is 2ºC), I am delighted with the Frost Days count.
I thought that for this type of graph, as for the warmest days too, it would be possible to add a * or something similar on the lower axis to the years that do not have complete data, as in my case 2012, when I installed the station by the end of summer. What do you think?
Re: v7.2.0 b1
Posted: Sat 07 Sep 2024 7:35 am
by HansR
Thanks @meteosangonera, it looks good (and as expected: no Ice Days) on your site.
meteosangonera wrote: ↑Sat 07 Sep 2024 6:44 am
I thought that for this type of graph, as for the warmest days too, it would be possible to add a * or something similar on the lower axis to the years that do not have complete data, as in my case 2012, when I installed the station by the end of summer. What do you think?
That is something I addressed differently. As most of those charts use statistics with the means to compare years I saw the problem of incomplete data (years). Therefore I created a parameter
RecordsBeganDate= which determines the start of the data used. Any bias because of incomplete data will then disappear.
So in your case, if you set that to
RecordsBeganDate=01/01/13 the year 2012 with erroneous averages and Std Devs would not be presented in the charts. And you would only lose 4 months but get better statistics. If a user would miss several days - a broken station or other things - a loss of 15 days is accepted while calculating averages etc...
The use of
RecordsBeganDate= is specific for CUtils and has no effect on CMX which has its own parameter for the startdate (which I think does not break off any charts or data calculation).
RecordsBeganDate= is supposed to be made effective when you have enough data and is intended to give the user a grace period for setting up the station, experimenting during setup etc... The idea is that during the startup period of the station the data may not be good anyway.
If that is not good enough for you I will think about an asterisk marking an incomplete year (the current year does not need to be marked, it is incomplete by definition, any viewer will understand that I assume) but as that should be done for all charts that would be quite a job
Not sure yet how to achieve that easily...
Re: v7.2.0 b1
Posted: Sat 07 Sep 2024 1:16 pm
by AndyKF650
Hi Hans
I would normally get involved with this beta but currently I am in mid change of service provider so extra testing is definitely off the agenda.
Re: v7.2.0 b1
Posted: Sat 07 Sep 2024 1:45 pm
by HansR
That's OK Andy, it seems everything is functioning so things will continue later with beta 2 when the diary contents has changed. That will take some time. In the mean time you can simply use the new chart
Good luck with the provider change.
Re: v7.2.0 b1
Posted: Sat 07 Sep 2024 8:01 pm
by Nossie
Hi Hans, just wondering if it's normal for the footer not to update?
thanks.
Re: v7.2.0 b1
Posted: Sat 07 Sep 2024 8:31 pm
by HansR
Nossie wrote: ↑Sat 07 Sep 2024 8:01 pm
Hi Hans, just wondering if it's normal for the footer not to update?
thanks.
Apparently you only ran the module graphs. In that case the footer of the indexfile does not update (it was generated by another version) and only the module gets the footer. This way you can see how everything hangs together
Re: v7.2.0 b1
Posted: Sat 07 Sep 2024 8:36 pm
by HansR
And btw: filling in your normal value will definitely improve your monthly average temperature chart
Re: v7.2.0 b1
Posted: Sat 07 Sep 2024 8:50 pm
by Nossie
so it updates now?
Code: Select all
pi Europa SSH ~ $ sudo docker exec -i MXWeather dotnet utils/bin/cumulusutils.dll website
2024-09-07 21:49:12.074 CumulusUtils Initial: Shutting down the default listener
2024-09-07 21:49:12.114 CUstrings[xx].ini : CUstringsEN.ini looked for.
2024-09-07 21:49:12.122 CumulusUtils version: 7.2.0 beta 1
2024-09-07 21:49:12.123 CuSupport constructor : Unit Wind (m/s, mph, km/h, kts): mph
2024-09-07 21:49:12.125 CuSupport constructor : Unit Pressure (mb,hPa,inHg): hPa
2024-09-07 21:49:12.127 CuSupport constructor : Unit Rain (mm,in): mm
2024-09-07 21:49:12.128 CuSupport constructor : Unit T (C,F): °C
2024-09-07 21:49:12.130 CuSupport constructor : Unit Distance (m, mi, km, kn): mi
2024-09-07 21:49:12.132 CuSupport constructor : Unit Height (m, ft): ft
2024-09-07 21:49:12.138 InetSupport: Constructor starting
2024-09-07 21:49:12.159 CumulusUtils : ----------------------------
2024-09-07 21:49:12.160 CumulusUtils : Entering Main
2024-09-07 21:49:12.185 HelpTexts: starting
2024-09-07 21:49:12.224 CommandLineArgs : starting
2024-09-07 21:49:12.226 CommandLineArgs : handling arg: website
2024-09-07 21:49:12.228 Dayfile: Reading the dayfile.txt...
2024-09-07 21:49:12.393 CumulusMX Version: 4.1.3 build 4028
2024-09-07 21:49:12.424 SystemStatus : DoingUnix
2024-09-07 21:49:12.610 GenerateStationMap: Starting
2024-09-07 21:49:12.639 MeteoCam: Starting
2024-09-07 21:49:12.719 USerReports: Starting
2024-09-07 21:49:13.625 DoExtraSensors - Starting
2024-09-07 21:49:13.780 GenerateExtraSensorsModule: Generating the Module Javascript code...
Re: v7.2.0 b1
Posted: Sat 07 Sep 2024 9:00 pm
by HansR
Nossie wrote: ↑Sat 07 Sep 2024 8:50 pm
so it updates now?
Code: Select all
pi Europa SSH ~ $ sudo docker exec -i MXWeather dotnet utils/bin/cumulusutils.dll website
[...]
2024-09-07 21:49:13.625 DoExtraSensors - Starting
2024-09-07 21:49:13.780 GenerateExtraSensorsModule: Generating the Module Javascript code...
I m no docker expert but I think
Code: Select all
sudo docker exec -i MXWeather dotnet utils/bin/cumulusutils.dll website
Yes, should do the trick. But if I look at your site it doesn't. It seems as if it breaks off while generating the Extra Sensor module.
Unfortunately I will be out and be back on Tuesday. If nobody else solved the issue we'll look again.
Could you post the complete logfile please.
Re: v7.2.0 b1
Posted: Sat 07 Sep 2024 11:47 pm
by HansR
Nossie wrote: ↑Sat 07 Sep 2024 8:50 pm
so it updates now?
The log says
2024-09-07 but your site says
2024-09-06 (it still does).
How come?
Re: v7.2.0 b1
Posted: Sun 08 Sep 2024 2:52 pm
by AndyKF650
Hi Hans
My new hosted site is now up and running using Freddie's hosting as suggested.
The beta looks good and installed with no issues. The Frost days chart is interesting but in Jersey they are not very common. The sea is a great moderating influence.
As an aside would it be possible to correct the units on the Home page Solar chart so that they read xx W/m2 rather than xx W/M2 which has an altogether different meaning.
Re: v7.2.0 b1
Posted: Sun 08 Sep 2024 7:12 pm
by HansR
AndyKF650 wrote: ↑Sun 08 Sep 2024 2:52 pm
As an aside would it be possible to correct the units on the Home page Solar chart so that they read xx W/m
2 rather than xx W/M2 which has an altogether different meaning.
That should not be impossible...
Re: v7.2.0 b1
Posted: Mon 09 Sep 2024 6:17 pm
by Nossie
sorry Hans, I was just confirming if it should bit busy but will do it asap -thanks.