Cumulus Support

Hello,

We have the latest Cumulus MX build with a WeatherLink Live data logger. Everything was working correctly until we rebooted the WLL. Now we don't have any outdoor temperature or barometric pressure readings. Wind speed/direction & indoor/outdoor humidity are working as well as indoor temperature. However, the pressure and outdoor temp show 0 (zero). I have reinstalled Cumulus MX (small update) and of course rebooted & restarted Cumulus. The WLL is uploading the current outdoor temp and pressure to Davis, so I think the WLL is working correctly. Cumulus just isn't getting that info. However, it is getting some info, so I think the networking is correct.

Any help is appreciated. Thank you

Chris

Switch on debug and data logging, let MX run for 10 mins, then you can switch the logging off again and post the latest MXdiags file. Thanks.

Thank you very much for the reply and instructions. I will get this asap and post it. I am traveling today but will asap.

Chris

Attach is the log file. Very sorry for the delay, this station is located at my parents home. Also, this isn't the station in my profile. This is a Davis Vantage Vu with Weatherlink Live.

Thank you
Chris

I'm not 100% sure what has gone wrong, but to get you going again please edit your Spike settings...

Settings > Calibration Settings:

Pressure: Spike=99999, Min=0, Max=99999
Outdoor Temperature: Spike=9999, Min=-20, Max=9999

And see if that works, if not post the MXdiags log file after making those changes

Mark

Thank you, that fixed it. Do appreciate the help and the super quick response.

Chris