Page 1 of 1
WLL GetWllCurrent: Base exception - Connection refused
Posted: Fri 12 Jan 2024 10:13 am
by dazza1223
hey all ive been seeing this error for a long time now and no i like to get to the bottom off it to keep thing clean
I'm running a raspberry pi 4 ive check what mark said about the firewall but my pi hasn't got one ?
ive rebooted my WLL but it still coming nack?
2024-01-12 10:11:46 - ERROR: No current data received from the WLL, DataStopped triggered
2024-01-12 10:11:46 - GetWllCurrent: Base exception - Connection refused
2024-01-12 10:11:46 - GetWllCurrent: Error processing WLL response
2024-01-12 10:11:23 - ERROR: No current data received from the WLL, DataStopped triggered
2024-01-12 10:11:23 - GetWllCurrent: Base exception - Connection refused
2024-01-12 10:11:23 - GetWllCurrent: Error processing WLL response
2024-01-12 10:10:59 - ERROR: No current data received from the WLL, DataStopped triggered
2024-01-12 10:10:59 - GetWllCurrent: Base exception - Connection refused
2024-01-12 10:10:59 - GetWllCurrent: Error processing WLL response
2024-01-12 10:10:36 - ERROR: No current data received from the WLL, DataStopped triggered
2024-01-12 10:10:36 - GetWllCurrent: Base exception - Connection refused
2024-01-12 10:10:36 - GetWllCurrent: Error processing WLL response
Re: WLL GetWllCurrent: Base exception - Connection refused
Posted: Fri 12 Jan 2024 1:39 pm
by ConligWX
is the WLL reporting to weatherlink.com ok?
have you tried restarting cumulusmx? maybe turn on debugging and data logging, run again for a while, then post the mxdiag file.
Re: WLL GetWllCurrent: Base exception - Connection refused
Posted: Fri 12 Jan 2024 4:07 pm
by mcrossley
Well, the error implies the MX found the WLL on the network, tried to connect, but the WLL refused the connection for some reason of its own!
Re: WLL GetWllCurrent: Base exception - Connection refused
Posted: Fri 12 Jan 2024 4:12 pm
by dazza1223
Yea it's strange mark because this only stating to happen?
Re: WLL GetWllCurrent: Base exception - Connection refused
Posted: Sun 04 Aug 2024 2:46 pm
by ConligWX
old post I know but are you still getting these errors dazza??
I've started to get them now. once or twice a day. rebooted CumulusMX. just swaped out the eithernet cable and changed switchports on my 8 port switch just incase them is any issues there.
Code: Select all
2024-08-04 14:17:00.963 Wunderground: Rapid fire
2024-08-04 14:17:01.078 Wunderground: Successful upload
2024-08-04 14:17:01.577 GetWllCurrent: Sending GET current conditions request 3 to WLL: http://xxx.xx.xx.xx/v1/current_conditions ...
2024-08-04 14:17:01.580 GetWllCurrent: Error processing WLL response
2024-08-04 14:17:01.580 GetWllCurrent: Base exception - Connection refused
2024-08-04 14:17:01.580 ERROR: No current data received from the WLL, DataStopped triggered
2024-08-04 14:17:01.580 Alarm (Data Stopped): Triggered, value = True, threshold = 0, Message = No current data is being received from the WLL
2024-08-04 14:17:01.583 Alarm (Data Stopped): Sending email - attempt 1
debug is currently on and has been for a few weeks now. load on the cumulusmx is very low so nothing on cmx end. just curious as if anyone else is having the same issues now?
as soon as this error is reported, cmx is still talking to the WLL so not sure why the connection is refused just once in a while.
Re: WLL GetWllCurrent: Base exception - Connection refused
Posted: Sun 04 Aug 2024 2:57 pm
by mcrossley
I suspect that the odd one is when the WLL is "busy" doing something else. Maybe the upward connection to wl.com is slow or having transient errors? :shrug:
Re: WLL GetWllCurrent: Base exception - Connection refused
Posted: Sun 04 Aug 2024 3:45 pm
by ConligWX
mcrossley wrote: ↑Sun 04 Aug 2024 2:57 pm
I suspect that the odd one is when the WLL is "busy" doing something else. Maybe the upward connection to wl.com is slow or having transient errors? :shrug:
yeah I have checked the port for errors on the unifi switch and no issues there. swapped out the cable and used a different switchport.
I am though going to re-route the cabling since I have a switch thats in the network route that maybe causing issues with bandwidth. it is a strnge error though since its only just started