CumulusMX gauges wont load - Network issue?

[sparkynerd]

I have an issue that just popped up after running successfully for a while now:

Code: Select all

2023-08-01 16:38:33.389 LOOP2 enabled
2023-08-01 16:38:33.390 IP address = 10.10.0.220 Port = 22222
2023-08-01 16:38:33.390 periodic disconnect = 0
2023-08-01 16:38:33.392 InitTCP: Connecting to the station
2023-08-01 16:38:33.393 OpenTcpPort: TCP Logger Connect attempt 1
2023-08-01 16:38:33.562 This Cumulus MX instance is running the latest version
2023-08-01 16:38:34.401 OpenTcpPort: TCP Logger reconnected
2023-08-01 16:38:34.401 InitTCP: Flushing input stream
2023-08-01 16:38:36.407 InitTCP: Sending TEST (1) command
2023-08-01 16:38:36.512 InitTCP: Error - Unable to write data to the transport connection: Connection reset by peer.
2023-08-01 16:38:36.513 Connected OK
2023-08-01 16:38:36.515 Reading firmware version
2023-08-01 16:38:36.518 WakeVP: Starting
2023-08-01 16:38:36.518 WakeVP: Problem with TCP connection - The operation is not allowed on non-connected sockets.

I am running a Davis Vantage Vue with Weather Logger and a Windows 10 PC running the latest version of CMX connected to a Unifi network. The gauges on CMX are all zero, and the last station update never changes from 12:00. I tried running CMX on a different Windows PC with the same error. Then I created a temporary network on a spare router, moved the PC and Davis unit to that, and it worked fine, so I think it's something with my network. The Davis Weather Logger and PC are on the same network, and I have a blinking network activity light on the weather logger. Any ideas what could be wrong here? I have Wireshark to look at packets if that helps. Thanks in advance!

[mcrossley]

Is the logger address still 10.10.0.220 ?

Is it still uploading to wl.com? I see you have a zero disconnect period, so maybe you do not use that feature.

First I'd try a power cycle of the logger.

[sparkynerd]

Thanks for the suggestions! I've power cycled the computer, the Davis & logger, and the network equipment. I also re-confirmed the logger address, and terminal shows "Station Connected." I don't upload anything to WeatherLink or any 3rd party services right now. The odd thing is that everything works as soon as I move it to another network (completely separate equipment / same subnet & IP addresses). I've checked my network security logs to see if its blocking the traffic but don't see anything out of the ordinary.

[mcrossley]

Does the network router have an isolation mode that has become enabled?