Page 1 of 3
Web tag error with davis wll
Posted: Sat 27 May 2023 8:56 pm
by jlmr731
Running a linux vm for cumulus that connects to my davis wll, all seems to work well other than the Web tag error problem. dont know if the wll doesnt output the tokens for the webtags or just a misconfiguration on my side.
see mxdiags file attached.
Re: Web tag error with davis wll
Posted: Sun 28 May 2023 2:17 am
by HansR
#DavisReceptionPercent requires a value for tx: <#DavisReceptionPercent tx=1> assuming your id is "1".
I don't know much about the wll but did you configure that right?
Re: Web tag error with davis wll
Posted: Sun 28 May 2023 2:16 pm
by dazza1223
On the wll I can't seem to get this working
And I have 2 transmitters
<#DavisReceptionPercent tx=1>
<#DavisReceptionPercent tx=2>
Re: Web tag error with davis wll
Posted: Mon 29 May 2023 6:45 pm
by mcrossley
@jlmr731 - Hans has identified your issue, you must specify a transmitter id, you have it blank: <#DavisReceptionPercent tx=>
@dazza - can you provide a log with debug and data logging on that covers a start-up of CMX please.
Re: Web tag error with davis wll
Posted: Tue 30 May 2023 11:22 am
by dazza1223
here you go mark
MXdiags.zip
Re: Web tag error with davis wll
Posted: Tue 30 May 2023 8:49 pm
by jlmr731
OK first these errors are generated from cutils when its run, so where would I add (specify) transmitter id, dont see any options in gui settings, and not sure to add to cumulusutils.ini file or into cumulus.ini file. Or would it be something else? and what is the format like transmitter id=1
Re: Web tag error with davis wll
Posted: Wed 31 May 2023 3:34 am
by HansR
jlmr731 wrote: ↑Tue 30 May 2023 8:49 pm
OK first these errors are generated from cutils when its run, so where would I add (specify) transmitter id, dont see any options in gui settings, and not sure to add to cumulusutils.ini file or into cumulus.ini file. Or would it be something else? and what is the format like transmitter id=1
Aha... sorry for that, you had not identified yourself as user of CUtils. You find the inifile parameters
for Sysinfo in the wiki.
The Tx parameter is a comma separated list containing the transmitters you have configured.
Re: Web tag error with davis wll
Posted: Wed 31 May 2023 1:52 pm
by mcrossley
dazza1223 wrote: ↑Sun 28 May 2023 2:16 pm
On the wll I can't seem to get this working
And I have 2 transmitters
<#DavisReceptionPercent tx=1>
<#DavisReceptionPercent tx=2>
I had a look at your log and the data is being fetched from wl.com correctly and is putting the values in the log file (%=nnn)...
Code: Select all
2023-05-30 12:16:47.687 WLL Health - found health data for ISS device TxId = 2
2023-05-30 12:16:47.687 WLL Health: ISS 2: Battery state is OK
2023-05-30 12:16:47.688 WLL Health: ISS 2: Errors=0, CRCs=0, Resyncs=0, Streak=423, %=100, RSSI=-63
2023-05-30 12:16:47.689 WLL Health - found health data for ISS device TxId = 1
2023-05-30 12:16:47.689 WLL Health: ISS 1: Battery state is OK
2023-05-30 12:16:47.690 WLL Health: ISS 1: Errors=27, CRCs=27, Resyncs=0, Streak=28, %=74, RSSI=-82
The value in the log file is from the same variable that the webtag uses, so I'm mystified as to why is isn't working.
Re: Web tag error with davis wll
Posted: Wed 31 May 2023 2:43 pm
by HansR
mcrossley wrote: ↑Wed 31 May 2023 1:52 pm
The value in the log file is from the same variable that the webtag uses, so I'm mystified as to why is isn't working.
@Mark: Because @jlmr731 uses CUtils and did not configure the necessary Tx=1,2 in the SysInfo section.
Re: Web tag error with davis wll
Posted: Wed 31 May 2023 4:28 pm
by dazza1223
I've created a little Web tag file and let cmx process it and it returns back as 0 on both channels
Re: Web tag error with davis wll
Posted: Wed 31 May 2023 4:29 pm
by dazza1223
HansR wrote: ↑Wed 31 May 2023 2:43 pm
mcrossley wrote: ↑Wed 31 May 2023 1:52 pm
The value in the log file is from the same variable that the webtag uses, so I'm mystified as to why is isn't working.
@Mark: Because @jlmr731 uses CUtils and did not configure the necessary Tx=1,2 in the SysInfo section.
Mark I will try it on my vp2 and see if I get the same results?
Re: Web tag error with davis wll
Posted: Wed 31 May 2023 5:49 pm
by mcrossley
HansR wrote: ↑Wed 31 May 2023 2:43 pm
mcrossley wrote: ↑Wed 31 May 2023 1:52 pm
The value in the log file is from the same variable that the webtag uses, so I'm mystified as to why is isn't working.
@Mark: Because @jlmr731 uses CUtils and did not configure the necessary Tx=1,2 in the SysInfo section.
I was replying to Dazza - two different issues in the same thread.
Re: Web tag error with davis wll
Posted: Wed 31 May 2023 7:48 pm
by mcrossley
Hmm, my install with WLL, sending this to the local API...
Code: Select all
tx1pct=<#DavisReceptionPercent tx=1>
tx2pct=<#DavisReceptionPercent tx=2>
gives...
Re: Web tag error with davis wll
Posted: Wed 31 May 2023 8:13 pm
by HansR
mcrossley wrote: ↑Wed 31 May 2023 5:49 pm
I was replying to Dazza - two different issues in the same thread.
Yes. Confusing but now I got it
dazza1223 wrote: ↑Wed 31 May 2023 4:28 pm
I've created a little Web tag file and let cmx process it and it returns back as 0 on both channels
Doesn't the statistics require a paid subscription before getting values?
I remember vaguely...
Re: Web tag error with davis wll
Posted: Wed 31 May 2023 8:21 pm
by dazza1223
Yes I pay for one