Cumulus Support

Hello brainstrust!!!

I'm hoping that someone is able to help here. I have been using CMX on a windows PC (10) for the past year with pretty much no problems. I retired that PC to begin using another one (again W10) installed CMX as per the last one, collected all the old data and happy days. Just recently though I have begun to have problems with the data not being sent (although I am still sending the data to WU, Ecowitt, Weathercloud) and it is continuing to register data on those sites (expect Windy). Looking at the CMX console on the PC it indicates that "Normal running" is occurring. I don't really know what I am looking at with the debug files etc so I was wondering if someone here would be able to run their eyes over what the problem might be?? I have had a look through the debug file and the only thing that jumps out at me is that the EasyWeather ver has updated from 1.6.4 to .5 (has something been broken in the process??) Also why would the station update be occurring before CMX (I haven't seen that before)

As CMX is passive for HTTP Ecowitt stations - it just listens for the data sent from your WS2900 - there is limited info to go on. The data just stops being received.

Looking in the log this happened a few times previously but recovered after 25-30 minutes.

That points to either a local network issue, or a problem with the WS2900 as being the most likely causes.

There are also errors for some your FTP uploads - 524 = Cannot create file. But not all the time.