CMX Not reading from outdoor sensors

[The Dalek Hunter]

https://longsutton-weather.co.uk

Overnight CMX has stopped receiving data for my outdoor Ecowitt Sensors - ie no wind/UV/temperature etc.

I have rebooted the GW1100 and rebooted CMX to no avail.

If I use the WS View Plus app all the data is present so its a CMX problem and not a weather station problem.

This is what the log is saying.

2023-02-01 08:26:47.865 Realtime[0]: Not all data is ready, aborting process
2023-02-01 08:27:00.193 Minimum data set of pressure, temperature, and wind is not available and NoSensorCheck>
2023-02-01 08:27:07.860 Realtime[1]: Not all data is ready, aborting process
2023-02-01 08:27:27.860 Realtime[2]: Not all data is ready, aborting process
2023-02-01 08:27:47.861 Realtime[3]: Not all data is ready, aborting process
2023-02-01 08:28:00.158 Minimum data set of pressure, temperature, and wind is not available and NoSensorCheck>
2023-02-01 08:28:07.861 Realtime[4]: Not all data is ready, aborting process
2023-02-01 08:28:27.861 Realtime[5]: Not all data is ready, aborting process
2023-02-01 08:28:47.861 Realtime[6]: Not all data is ready, aborting process
2023-02-01 08:29:00.167 Minimum data set of pressure, temperature, and wind is not available and NoSensorChe

[mcrossley]

Any other changes like firmware updates?

Can you switch on data logging, then post the latest MXdiags file after letting it run for a while.

[The Dalek Hunter]

No recent updates to firmware as far as I am aware. It has the latest version.

Just to clarity - Wind is being received - it is outdoor temperature and humidity that is not being received

Logs as requested

[water01]

Code: Select all

2023-02-01 09:44:22.121 Running Ecowitt Local API auto-discovery...
2023-02-01 09:44:22.121 Current IP address=192.168.1.10, current MAC=40:F5:20:39:8E:C8
2023-02-01 09:44:22.128 Using local IP address 192.168.1.244 to discover the Ecowitt device
2023-02-01 09:44:22.129 Discovery Run #1
2023-02-01 09:44:22.224 Discovered Ecowitt device: EasyWeatherPro-10E8E4 V5.1.1, IP=192.168.1.131, MAC=BC:FF:4D:10:E8:E4
2023-02-01 09:44:22.326 Discovered Ecowitt device: HP10-WIFI11FC V1.0.7, IP=192.168.1.237, MAC=E8:DB:84:0F:11:FC
2023-02-01 09:44:22.378 This Cumulus MX instance is running the latest version
2023-02-01 09:44:23.992 Discovery Run #2
2023-02-01 09:44:24.079 Discovered Ecowitt device: EasyWeatherPro-10E8E4 V5.1.1, IP=192.168.1.131, MAC=BC:FF:4D:10:E8:E4
2023-02-01 09:44:24.994 Discovered Ecowitt device: HP10-WIFI11FC V1.0.7, IP=192.168.1.237, MAC=E8:DB:84:0F:11:FC
2023-02-01 09:44:26.500 WS Client Connect: ::ffff:192.168.1.176, Total clients: 1
2023-02-01 09:44:27.329 Discovered more than one potential Ecowitt device.
2023-02-01 09:44:27.329 Please select the IP address from the list and enter it manually into the configuration

It looks like the auto discovery is getting confused in finding the correct Ecowitt device and is advising you to manually set it up in the Station Configuration.

I would try that first and see if that solves the problem.

[The Dalek Hunter]

Sorry - my bad - (embarrassed+++) nothing to do with CMX whatsoever!!!!
It's so long since I set this station up I forgot the outdoor temperature and humidity is supplied by a WH32E.

The reason I thought WS View Plus was ok was because the sensor simply wasn't showing. (DOH)

When I went to check on the WH32, well see attached photo!!

Fortunately I had a spare and I am up and running again. Sorry everyone!!!!

But I did turn off auto discovery anyway as I have an Ecowitt Wittboy as well

[water01]

Wow what happened to that!!

[The Dalek Hunter]

I "thought" I had mounted in in a shelter location under eaves of my house - obviously not!!

The stuff on the front is (was) a double sided sticky pad to hold it in place