Cumulus MX and GW1100 - website does not update

[Waldi77]

Cumulus MX and GW1100 - website does not update. Through localhost you can see that the data is received normally, meanwhile the server can only run manually. The WH-2080 station works normally with these settings. What could be the reason?
Regards

[PaulMy]

Hi,
Your site seems to be updating at 5 minute interval for me. Your http://www.pogodynka.pogodno.szczecin.pl/realtime.txt updates at about 30 seconds and Gauges also at the same interval.

Enjoy,
Paul

[Waldi77]

This applies to this website: www.meteo.pogodno.szczecin.pl
How to manually force update everything is ok.
I have set the update time to 5 minutes and unfortunately nothing changes.
This is what my settings look like (attachments)

[mcrossley]

It helps to look in the MXdiags file. I suspect you have messages saying you do not have the minimum set of sensors (temp/press/wind).

If you have an incomplete station then this FAQ applies: https://www.cumuluswiki.org/a/FAQ#Cumul ... that_I_set

Note however in CMX you can change that setting in Station Settings | Common Options, you do not need to edit the Cumulus.ini file.

[Waldi77]

It helps to look in the MXdiags file. I suspect you have messages saying you do not have the minimum set of sensors (temp/press/wind).

If you have an incomplete station then you this FAQ applies: https://www.cumuluswiki.org/a/FAQ#Cumul ... that_I_set

Note however in CMX you can change that setting in Station Settings | Common Options, you do not need to edit the Cumulus.ini file.

Thank you very much. Your answer solved the problem - I checked "no sensor check" and it's ok, the page is updating.