Running weather-display and trying to running CumulusMX along side it, weather-display is set for only using UDP data
when i start CumulusMX i get a notice.. "only one usage of each socket address (protocol/network address/port) is normally permitted.
and i get no data from the station.
any idea how to fix this problem?
Welcome to the Cumulus Support forum.
Latest Cumulus MX V4 release 4.4.2 (build 4085) - 12 March 2025
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
If you are posting a new Topic about an error or if you need help PLEASE read this first viewtopic.php?p=164080#p164080
Latest Cumulus MX V4 release 4.4.2 (build 4085) - 12 March 2025
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
If you are posting a new Topic about an error or if you need help PLEASE read this first viewtopic.php?p=164080#p164080
weatherflow one connection permitted?
Moderator: mcrossley
-
mcrossley
- Posts: 14388
- Joined: Thu 07 Jan 2010 9:44 pm
- Weather Station: Davis VP2/WLL
- Operating System: Bullseye Lite rPi
- Location: Wilmslow, Cheshire, UK
- Contact:
Re: weatherflow one connection permitted?
In general no - but it depends. To work it means both programs must be coded to open the port in a shared mode, this is not the default.
I have just looked at the CMX code for the Tempest (I did not write it), and it does not open the port in shared mode - I doubt WD does either.
EDIT: I'll add a TODO to change CMX to open the port in shared mode.
I have just looked at the CMX code for the Tempest (I did not write it), and it does not open the port in shared mode - I doubt WD does either.
EDIT: I'll add a TODO to change CMX to open the port in shared mode.