Hi team. Installed 3221 today, started OK, but now I'm getting:
Looking for Fine Offset station
Fine Offset station found
Connected to station
Looking for Fine Offset station
Fine Offset station found
Connected to station
Getting this every few minutes. System seems to be running OK, and dashboard looks good.
Your thoughts on how to suppress these messages please. Logs attached.
Many thanks.
Welcome to the Cumulus Support forum.
Latest Cumulus MX V4 release 4.4.2 (build 4085) - 12 March 2025
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
If you are posting a new Topic about an error or if you need help PLEASE read this first viewtopic.php?p=164080#p164080
Latest Cumulus MX V4 release 4.4.2 (build 4085) - 12 March 2025
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
If you are posting a new Topic about an error or if you need help PLEASE read this first viewtopic.php?p=164080#p164080
Build 3221
Moderator: mcrossley
-
rons47
- Posts: 17
- Joined: Wed 12 Aug 2020 2:53 am
- Weather Station: Aercus WS3085
- Operating System: Windows 10
Build 3221
You do not have the required permissions to view the files attached to this post.
-
water01
- Posts: 3669
- Joined: Sat 13 Aug 2011 9:33 am
- Weather Station: Ecowitt HP2551
- Operating System: Windows 10/11 64bit Synology NAS
- Location: Burnham-on-Sea
- Contact:
Re: Build 3221
This sounds like CMX is losing contact with the station. Have you tried disconnecting the console and removing the batteries and restarting after a minute or two?
David
-
rons47
- Posts: 17
- Joined: Wed 12 Aug 2020 2:53 am
- Weather Station: Aercus WS3085
- Operating System: Windows 10
Re: Build 3221
Hi David
Yes - did that a couple of times. Didn't change anything. However, I have turned off FO sync, ran MX, turned it back on and now seems stable. Last message are:
Completed read of history data from the console
2023-01-12 18:01:48 Start Synchronising with console, run #1
Normal running
- Found times for:- sensor: True, station: False , solar:True
2023-01-12 18:02:48 Stop Synchronising
So far so good, Fingers crossed.
Yes - did that a couple of times. Didn't change anything. However, I have turned off FO sync, ran MX, turned it back on and now seems stable. Last message are:
Completed read of history data from the console
2023-01-12 18:01:48 Start Synchronising with console, run #1
Normal running
- Found times for:- sensor: True, station: False , solar:True
2023-01-12 18:02:48 Stop Synchronising
So far so good, Fingers crossed.
-
ConligWX
- Posts: 1835
- Joined: Mon 19 May 2014 10:45 pm
- Weather Station: Davis vPro2+ w/DFARS + AirLink
- Operating System: Ubuntu 24.04.1 LTS
- Location: Bangor, NI
- Contact:
Re: Build 3221
FO Consoles are well known for loosing data because of USB issues. you can help this by using a shielded USB cable and using ferrite cores on both ends.
-
davepaterson
- Posts: 176
- Joined: Tue 01 Jan 2019 8:12 pm
- Weather Station: HP2551 , WH40/WH68+WH57/GW1100C
- Operating System: Windows 11/11
- Location: Hamilton, Scotland UK
Re: Build 3221
the WS3085 had was very bad with USB problems. Aercus now does not recommend running the WS3085 continuously . they added that after I bought mine.