Page 2 of 2
Re: Display unit filling up
Posted: Thu 14 Jan 2010 8:14 pm
by tonester
But to clear it
I,m pretty sure you touch it till the word "clear" comes up then put you finger on it again till it empties...
Re: Display unit filling up
Posted: Thu 14 Jan 2010 8:18 pm
by daj
quoting from the manual....
Touch Memory section to activate history data toggle display,......Touch Memory section again will trigger the memory clear procedure: the word of “CLEAR” will be flashing, the full memory usage icon will be flashing. Press and hold the memory full icon for 3 seconds will clear the memory.
However, I have to say I tried this some time ago and it did not work for me. In the end I left it as it doesn't cause any problems as it is a circular buffer
Re: Display unit filling up
Posted: Thu 04 Feb 2010 1:06 pm
by philcdav
hi guys.
The station logger DOES overwrite data in a circular fashion. Running Cumulus or EW will not affect the console STORED data. Only EW can clear the stored data AT PRESENT !
If you are collecting data in Easy Weather every 5 minutes it will last a few weeks. Set EW to collect every 15 min and u quadruple the data period to about 36 days.
Try collecting data in EW and Cumulus. 2 chances to get all the data right.
As noted previously, i run EW 1 or 2 times a month as a backup with a final run on the 1st of the next month, saving the data as the previous month first day/hr to las day/hr.