Time usage and ftp problem

[climasaladillo]

Hi guys.

Install the latest version of CumulusMx on my raspberry pi.

The issue is that I can't get ftp uploads to work.
the connection with ftp is successful but it does not load the realtime.txt

And another important detail is that, when I change the time zone of the raspy (which by default comes in London and I pass it to Argentina)
All values ​​on the Cumulus page are set to "0".
I mean the connection exists but with values ​​in "0"
I clarify that the regional configurations do not modify them

If I go back to the original schedule, raspy starts again to show the correct data.

My station is a fine offset wh-1081 connected to a raspberry pi 3

I currently have this version
Cumulus MX 3.10.5 b3122
working perfectly, but I would like to be up to date.

I was comparing all the configurations and they are the same

[mcrossley]

Are you just changing the time zone, or the whole locale?

You cannot change the locale CMX after you have run it (not unless you edit all the data files to match the new locale.

If you change the locale, then try a new install of CMX and see if that works.

If not, then please post the MXdiags file.

[bladel]

I'm having the same problem with CMX b3215
Tried realtime.txt upload under "Real time Interval Settings" and as "Extra Web Files".

Normal 15 m uploads do work.

Code: Select all

2022-12-18 20:06:58.147 FTP[143]: Error uploading web/realtimegauges.txt to /realtimegauges.txt : Error while uploading the file to the server. See InnerException for more info.
2022-12-18 20:06:58.147 FTP[143]: Inner Exception: Unknown command
2022-12-18 20:06:58.239 FTP[143]: Error uploading /home/CumulusMX/realtime.txt to /realtime.txt : Error while uploading the file to the server. See InnerException for more info.
2022-12-18 20:06:58.240 FTP[143]: Inner Exception: Unknown command

[SamiS]

I'm having the same problem with CMX b3215
Tried realtime.txt upload under "Real time Interval Settings" and as "Extra Web Files".

Normal 15 m uploads do work.

Code: Select all

2022-12-18 20:06:58.147 FTP[143]: Error uploading web/realtimegauges.txt to /realtimegauges.txt : Error while uploading the file to the server. See InnerException for more info.
2022-12-18 20:06:58.147 FTP[143]: Inner Exception: Unknown command
2022-12-18 20:06:58.239 FTP[143]: Error uploading /home/CumulusMX/realtime.txt to /realtime.txt : Error while uploading the file to the server. See InnerException for more info.
2022-12-18 20:06:58.240 FTP[143]: Inner Exception: Unknown command

Have you checked that the realtime.txt and realtimegauges.txt exist and have some content? Have you ticked the generate -option for both? (Screenshot from my install attached).

—
Sami

[SamiS]

Also have you stopped and restarted CMX? If you reconfigure ftp settings, they are not applied to realtime connection without restart since the connection is kept open all the time.

[bladel]

Yes, tried the same settings with reboot. Still the same error. Added ftp logging, but dont get more information.

Code: Select all

2022-12-19 08:27:12.960 Realtime[4]: Start cycle
2022-12-19 08:27:12.961 Realtime[4]: Creating realtime.txt
2022-12-19 08:27:13.469 Realtime[4]: Uploading - realtime.txt
2022-12-19 08:27:13.469 FTP[4]: Uploading realtime.txt to realtime.txt
2022-12-19 08:27:13.552 FTP[4]: Error uploading realtime.txt to realtime.txt : Error while uploading the file to the server. See InnerException for more info.
2022-12-19 08:27:13.553 FTP[4]: Inner Exception: Unknown command

[water01]

FTP logging is not saved in the MXDiags .txt file it is in a file called ftplog.txt.

[bladel]

"Unkown command" error was because of EPSV, disabled EPSV in settings and it is working now. Thanks a lot!