Cumulus Support

Support forum for Cumulus weather station software
https://cumulus.hosiene.co.uk/

No SteelSeries Gauges

https://cumulus.hosiene.co.uk/viewtopic.php?t=20823

Page 1 of 1

No SteelSeries Gauges

Posted: Thu 03 Nov 2022 11:04 am
by Geornat
Hi there
I installed CMX on Pi4. The SteelSeries Gauges are not displayed on Neil Thomas' template. I noticed that the realtime file was not created. I am on version 3.22.2 b3213. Your opinion?
Thanks

Re: No SteelSeries Gauges

Posted: Thu 03 Nov 2022 11:29 am
by water01
You have probably not set up the file to be FTP'd in Internet Settings / Interval Configuration / Real Time Interval Settings tick Enable Realtime FTP and then put ticks against the 2 files in FTP transfer.

Re: No SteelSeries Gauges

Posted: Fri 04 Nov 2022 4:13 pm
by Geornat
Ok for Internet Settings / Interval Configuration / Real Time Interval Settings tick Enable Realtime FTP and then put ticks against the 2 files in FTP transfer. But realtime.txt not create on my server

Re: No SteelSeries Gauges

Posted: Fri 04 Nov 2022 4:38 pm
by HansR
Could you post the MXdiags file and do you have your website URL?

Re: No SteelSeries Gauges

Posted: Fri 04 Nov 2022 4:39 pm
by water01
I think we need to see your MXDiags file. A link to your website will also be useful.

Re: No SteelSeries Gauges

Posted: Fri 04 Nov 2022 4:46 pm
by Geornat
20221104-164719.txt
Site dante7.free.fr/CumulusMX

Re: No SteelSeries Gauges

Posted: Fri 04 Nov 2022 4:52 pm
by freddie

Code: Select all

2022-11-04 16:47:34.942 Realtime[0]: Processing realtime file - realtimegauges.txt
2022-11-04 16:47:35.560 FTP[0]: Error uploading realtime.txt to /CumulusMX/realtime.txt : Error while uploading the file to the server. See InnerException for more info.
2022-11-04 16:47:35.560 FTP[0]: Inner Exception: EPSV not understood
There is a setting that has to be unticked or ticked. If you search the forum for EPSV then you will find the solution. There have been a few topics regarding EPSV recently.

Re: No SteelSeries Gauges

Posted: Fri 04 Nov 2022 4:58 pm
by PaulMy
Ok for Internet Settings / Interval Configuration / Real Time Interval Settings tick Enable Realtime FTP and then put ticks against the 2 files in FTP transfer. But realtime.txt not create on my server
The realtimegauges.txt is not found at your http://dante7.free.fr/CumulusMX/realtimegauges.txt (nor realtime.txt)
But your website seems to be updating so your Internet settings must be ok.

Are all the settings correct - see attached?
If so, enable FTP Logging for a short period and check CumulusMX\ftplog.txt and current MXdiags

Enjoy,
Paul

EDIT: I took too long to post, and freddie has identified the FTP issue

Re: No SteelSeries Gauges

Posted: Fri 04 Nov 2022 5:37 pm
by HansR
And to complete it: I woulld try to disable the EPSV setting, tick the appropriate square:
    Schermafbeelding 2022-11-04 183525.jpg

    Re: No SteelSeries Gauges

    Posted: Fri 04 Nov 2022 5:45 pm
    by HansR
    And having said the above: at 17:26 you modify a setting after which the realtime is transferred correctly apparently.
    Other transfers are also correct.
    I assume you know what you changed?

    Code: Select all

    2022-11-04 17:26:17.331 Realtime[172]: Start cycle
2022-11-04 17:26:17.332 Realtime[172]: Creating realtime.txt
2022-11-04 17:26:17.333 Realtime[172]: Processing realtime file - realtimegauges.txt
2022-11-04 17:26:17.580 FTP[172]: Error uploading realtime.txt to /CumulusMX/realtime.txt : Error while uploading the file to the server. See InnerException for more info.
2022-11-04 17:26:17.581 FTP[172]: Inner Exception: EPSV not understood
2022-11-04 17:26:17.796 FTP[172]: Error uploading web/realtimegauges.txt to /CumulusMX/realtimegauges.txt : Error while uploading the file to the server. See InnerException for more info.
2022-11-04 17:26:17.796 FTP[172]: Inner Exception: EPSV not understood
2022-11-04 17:26:17.796 Realtime[172]: End cycle
2022-11-04 17:26:25.689 Reading live data
2022-11-04 17:26:25.711 DoCommand(CMD_GW1000_LIVEDATA): Valid response
2022-11-04 17:26:25.711 Received: FF-FF-27-00-51-01-00-D9-06-42-08-26-4C-09-26-4C-02-00-72-07-46-0A-00-43-0B-00-06-0C-00-0A-15-00-00-06-0E-16-00-05-17-00-1A-FE-C9-22-4A-62-00-00-00-00-61-63-63-C5-B7-60-18-19-00-5C-0E-00-00-10-00-00-11-01-0D-12-00-00-01-0D-13-00-00-01-8A-0D-00-00-66
2022-11-04 17:26:25.711 LiveData: Wind Decode >> Last=2,2, LastDir=67, Gust=3,6, (MXAvg=3,3)
2022-11-04 17:26:25.712 DoWind: gust=3,6, speed=2,2
2022-11-04 17:26:31.564 Updating internet settings
2022-11-04 17:26:31.564 Writing Cumulus.ini file
2022-11-04 17:26:31.584 Completed writing Cumulus.ini file
2022-11-04 17:26:32.331 Realtime[173]: Start cycle
2022-11-04 17:26:32.331 Realtime[173]: End cycle
2022-11-04 17:26:35.712 Reading live data
2022-11-04 17:26:35.734 DoCommand(CMD_GW1000_LIVEDATA): Valid response
2022-11-04 17:26:35.734 Received: FF-FF-27-00-51-01-00-D9-06-42-08-26-4C-09-26-4C-02-00-72-07-46-0A-00-31-0B-00-06-0C-00-0A-15-00-00-06-0E-16-00-05-17-00-1A-FE-C9-22-4A-62-00-00-00-00-61-63-63-C5-B7-60-18-19-00-5C-0E-00-00-10-00-00-11-01-0D-12-00-00-01-0D-13-00-00-01-8A-0D-00-00-54
2022-11-04 17:26:35.734 LiveData: Wind Decode >> Last=2,2, LastDir=49, Gust=3,6, (MXAvg=3,3)
2022-11-04 17:26:35.734 DoWind: gust=3,6, speed=2,2
2022-11-04 17:26:45.735 Reading live data
2022-11-04 17:26:45.758 DoCommand(CMD_GW1000_LIVEDATA): Valid response
2022-11-04 17:26:45.758 Received: FF-FF-27-00-51-01-00-D9-06-42-08-26-4C-09-26-4C-02-00-72-07-46-0A-00-6A-0B-00-0B-0C-00-14-15-00-00-06-0E-16-00-05-17-00-1A-FE-C9-22-4A-62-00-00-00-00-61-63-63-C5-B7-60-18-19-00-5C-0E-00-00-10-00-00-11-01-0D-12-00-00-01-0D-13-00-00-01-8A-0D-00-00-9C
2022-11-04 17:26:45.759 LiveData: Wind Decode >> Last=4,0, LastDir=106, Gust=7,2, (MXAvg=3,3)
2022-11-04 17:26:45.759 DoWind: gust=7,2, speed=4,0
2022-11-04 17:26:47.332 Realtime[174]: Start cycle
2022-11-04 17:26:47.793 Realtime[174]: End cycle

    Re: No SteelSeries Gauges

    Posted: Sat 05 Nov 2022 6:28 am
    by Geornat
    ok works by disabling EPSV. Another problem on the Report menu, what do you think. Thanks

    Re: No SteelSeries Gauges

    Posted: Sat 05 Nov 2022 8:31 am
    by HansR
    Geornat wrote: ↑Sat 05 Nov 2022 6:28 am ok. works by disabling EPSV. Another problem on the Report menu, what do you think. Thanks
    Good.
    If I remember well there is something to do on the website if you deviate from the defaults but somebody more into the website could better help you there.

    Re: No SteelSeries Gauges

    Posted: Sat 05 Nov 2022 8:53 am
    by meteo19
    Geornat wrote: ↑Sat 05 Nov 2022 6:28 am ok works by disabling EPSV. Another problem on the Report menu, what do you think. Thanks
    Hi
    Your noaarpts.js indicates that your NOAA files are in the Reports folder outside the Reports folder does not exist on your site. You have to create it and set MX in Noaa settings Ftp Options FTP folder: direction/Reports
    Regards

    Re: No SteelSeries Gauges

    Posted: Sun 06 Nov 2022 4:05 pm
    by Geornat
    Ok thank you very much it seems to work with this modifications. :clap:
    All times are UTC
    Page 1 of 1

    Powered by phpBB® Forum Software © phpBB Limited