My Davis system has the ISS, Davis Monitor Panel and Davis Envoy in a single (physical) line with the ISS at one end of the line and Envoy at the other end. Although the Davis envoy, which is where MX gets its data currently works ok, some 'flatspots' is the MX TEMP curve (in Charts) leads me to think it would get best reception if the Envoy received its data on channel 2 (i.e the retransmitted from the Davis Monitor panel). Due to the distance and walls in between, I now have the Davis Monitor panel to receive ISS on channel 1 and retransmit on Channel 2 and looking to see if MX has a setting control which channel the Envoy gets its data...and hoping channel 2 has better results than channel 1. WLL has a way to set these, but I do not see such a setting in MX.
Thank you for thoughts!
Bridge
Welcome to the Cumulus Support forum.
Latest Cumulus MX V4 release 4.4.2 (build 4085) - 12 March 2025
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
If you are posting a new Topic about an error or if you need help PLEASE read this first viewtopic.php?p=164080#p164080
Latest Cumulus MX V4 release 4.4.2 (build 4085) - 12 March 2025
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
If you are posting a new Topic about an error or if you need help PLEASE read this first viewtopic.php?p=164080#p164080
MX Setting for Davis channel
-
mcrossley
- Posts: 14384
- Joined: Thu 07 Jan 2010 9:44 pm
- Weather Station: Davis VP2/WLL
- Operating System: Bullseye Lite rPi
- Location: Wilmslow, Cheshire, UK
- Contact:
Re: MX Setting for Davis channel
No CMX cannot reconfigure your Envoy, you will have to do that with the Davis WeatherLink software.
-
TheBridge
- Posts: 119
- Joined: Mon 16 Mar 2020 3:23 am
- Weather Station: Davis
- Operating System: Windows 10
- Contact:
Re: MX Setting for Davis channel
Mark, got it.
Thanks,
Bridge
Thanks,
Bridge