Data not reading from Station to C1 or C2

[imike]

i no but it is every other readings are there but on c1 it wont move from 2.9 deg when the station read -4

[daj]

So, just to be clear, your weather console says -4 but Cumulus V1 says 2.9 for temperature?

Do you have anything other than zeros in your Calibration section, under Configuration in Cumulus?

[imike]

yes this is what i got

[daj]

Sorry, i should have said zeros or ones! That looks fine

How are you telling cumulus to connect to the station in the Station Configuration?

EasyWeather (using .dat file)
Or
FineOffset/Watson...

Also, Unless you have selected EasyWeather, then Cumulus and EasyWeather should NOT be running together

[imike]

i have used easy weather.dat but i am only running cumulus v1

[daj]

see this post... https://cumulus.hosiene.co.uk/viewtopic.php?f=4&t=2032

You should be able to select the FineOffet direct setting rather than using the EasyWeather .dat file, as it is unreliable.

direct.png

Then you can stop running EasyWeather as Cumulus v1 will interface directly with the station console

[imike]

no i have not got any readings

[imike]

can any one help

[daj]

have you closed down EasyWeather?

Show me a screen shot of your Station Config. page please

thanks

[imike]

,.

[dane]

looks OK to me (apart from the Synchronise clock bit).
There may be a clue in the Diags folder, so please zip up the files in the cumulus\diags folder and attach here.

[6719jason]

Same here. Looks okay. I would remove the path to the Easyweather.Dat file personally.

I would also then, Shutdown Cumulus, Unplug console from PC and Restart the PC.

On Windows Splash Screen, I would then reinsert USB Lead from Console into the PC and fire up Cumulus.

Then, Problem solved

[imike]

thank you jason it works now