First of all many thanks for the Raspbian Raspberry PI CMX image
Followed the instructions in the wiki and it all just worked on my Rasp 4b(4Gb) - very happy and thanks for creating and documenting it so well
Long time since I dabbled in Linux so the hand holding was much appreciated
My plan is to run my existing CMX (on Windows) in parallel with the new one on RaspPi while I sort out backing up etc, with the eventual plan to run on Rasp only with a UPS.
I am not currently uploading anything to 3rd party sites from the Pi, I assume that I will need to move account details between the installations or create new accounts to avoid double tapping?
A question about the Ecowitt API.
I have generated the two keys for my Windows installation and that is all working fine. To get a similar resilience option for the RaspPi should i generate two new keys or reuse the current ones? Its for the same application of course but running on another machine
Once again a big thumbs up for the image
Welcome to the Cumulus Support forum.
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4019) - 03 April 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4019) - 03 April 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Shadow running Rasp CMX - Ecowitt API Query
Moderator: mcrossley
-
- Posts: 3254
- Joined: Sat 13 Aug 2011 9:33 am
- Weather Station: Ecowitt HP2551
- Operating System: Windows 10 64bit
- Location: Burnham-on-Sea
- Contact:
Re: Shadow running Rasp CMX - Ecowitt API Query
You should be able to use the existing API keys as they are only used in the event of failure to download history held by Ecowitt.
When you are ready to switch off the Windows machine to preserve all existing data (assuming you have some) I would not fully configure the Pi until you are ready to switch and then I would stop MX on the PI, copy the existing MX data across, then restart the Pi and configure the uploads (remember to take a note of the settings before shutting down the Windows machine.
When you are ready to switch off the Windows machine to preserve all existing data (assuming you have some) I would not fully configure the Pi until you are ready to switch and then I would stop MX on the PI, copy the existing MX data across, then restart the Pi and configure the uploads (remember to take a note of the settings before shutting down the Windows machine.
-
- Posts: 40
- Joined: Sun 15 Nov 2020 8:57 am
- Weather Station: FineOffset Gw1002
- Operating System: Win10
Re: Shadow running Rasp CMX - Ecowitt API Query
Thanks for the advice
Taking this slowly as everything is working just fine at the moment!
Taking this slowly as everything is working just fine at the moment!